Region can not start by Yengine error in dev version from yesterday

classic Classic list List threaded Threaded
12 messages Options
Reply | Threaded
Open this post in threaded view
|

Region can not start by Yengine error in dev version from yesterday

Luisillo Contepomi
Testing Grid with a region.
Robust.exe start without problems but region can not start.
Compiled in Win7 Framework64\v4.0.30319
No documentation about Yengine in opensimulator.org except a Chat log
with opinions but no information at all. I stop testing dev versions
waiting to new information

Regards,
Luisillo

---Error in console----
2018-12-12 14:46:55,351 INFO  [XEngine]: Script stop strategy is co-op
2018-12-12 14:46:55,403 FATAL Fatal error:
System.Reflection.TargetInvocationException: Exception has been thrown
by the target of an invocation. --->
System.TypeInitializationException: The type initializer for
'OpenSim.Region.ScriptEngine.Yengine.Yengine' threw an exception. --->
System.IO.FileLoadException: Could not load file or assembly 'log4net,
Version=2.0.8.0, Culture=neutral, PublicKeyToken=null' or one of its
dependencies. The located assembly's manifest definition does not
match the assembly reference. (Exception from HRESULT: 0x80131040)
   at OpenSim.Region.ScriptEngine.Yengine.Yengine..cctor()
   --- End of inner exception stack trace ---
   at OpenSim.Region.ScriptEngine.Yengine.Yengine..ctor()
   --- End of inner exception stack trace ---
   at System.RuntimeTypeHandle.CreateInstance(RuntimeType type,
Boolean publicOnly, Boolean noCheck, Boolean& canBeCached,
RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
   at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly,
Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
   at System.Activator.CreateInstance(Type type, Boolean nonPublic)
   at System.Activator.CreateInstance(Type type)
   at OpenSim.ApplicationPlugins.RegionModulesController.RegionModulesControllerPlugin.AddRegionToModules(Scene
scene) in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\RegionModulesController\RegionModulesControllerPlugin.cs:line
395
   at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
portadd_flag, Boolean do_post_init, IScene& mscene) in
x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
430
   at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
portadd_flag, IScene& scene) in
x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
376
   at OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostInitialise()
in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\LoadRegions\LoadRegionsPlugin.cs:line
130
   at OpenSim.OpenSimBase.StartupSpecific() in
x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
285
   at OpenSim.OpenSim.StartupSpecific() in
x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSim.cs:line
211
   at OpenSim.Framework.Servers.BaseOpenSimServer.Startup() in
x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Framework\Servers\BaseOpenSimServer.cs:line
170
_______________________________________________
Opensim-users mailing list
[hidden email]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region can not start by Yengine error in dev version from yesterday

Chris M
Hello, I can't reproduce this on my setup using the latest master.

"Compiled in Win7 Framework64\v4.0.30319" <-- Are you using .NET 4.0?
The requirements for this was changed some months ago to require .NET
4.6 or higher on master. If you haven't upgraded to v4.6 I would try
that and then compile again and see if it works. If you're already on
.NET v4.6 it could be a case of an out of date file and I would try a
fresh clone from master and copy the settings you need from your old
setup and see if that works.

Hope this helps! :)

On 12/12/2018 7:56 AM, Luisillo Contepomi wrote:

> Testing Grid with a region.
> Robust.exe start without problems but region can not start.
> Compiled in Win7 Framework64\v4.0.30319
> No documentation about Yengine in opensimulator.org except a Chat log
> with opinions but no information at all. I stop testing dev versions
> waiting to new information
>
> Regards,
> Luisillo
>
> ---Error in console----
> 2018-12-12 14:46:55,351 INFO  [XEngine]: Script stop strategy is co-op
> 2018-12-12 14:46:55,403 FATAL Fatal error:
> System.Reflection.TargetInvocationException: Exception has been thrown
> by the target of an invocation. --->
> System.TypeInitializationException: The type initializer for
> 'OpenSim.Region.ScriptEngine.Yengine.Yengine' threw an exception. --->
> System.IO.FileLoadException: Could not load file or assembly 'log4net,
> Version=2.0.8.0, Culture=neutral, PublicKeyToken=null' or one of its
> dependencies. The located assembly's manifest definition does not
> match the assembly reference. (Exception from HRESULT: 0x80131040)
>     at OpenSim.Region.ScriptEngine.Yengine.Yengine..cctor()
>     --- End of inner exception stack trace ---
>     at OpenSim.Region.ScriptEngine.Yengine.Yengine..ctor()
>     --- End of inner exception stack trace ---
>     at System.RuntimeTypeHandle.CreateInstance(RuntimeType type,
> Boolean publicOnly, Boolean noCheck, Boolean& canBeCached,
> RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
>     at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly,
> Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
>     at System.Activator.CreateInstance(Type type, Boolean nonPublic)
>     at System.Activator.CreateInstance(Type type)
>     at OpenSim.ApplicationPlugins.RegionModulesController.RegionModulesControllerPlugin.AddRegionToModules(Scene
> scene) in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\RegionModulesController\RegionModulesControllerPlugin.cs:line
> 395
>     at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
> portadd_flag, Boolean do_post_init, IScene& mscene) in
> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> 430
>     at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
> portadd_flag, IScene& scene) in
> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> 376
>     at OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostInitialise()
> in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\LoadRegions\LoadRegionsPlugin.cs:line
> 130
>     at OpenSim.OpenSimBase.StartupSpecific() in
> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> 285
>     at OpenSim.OpenSim.StartupSpecific() in
> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSim.cs:line
> 211
>     at OpenSim.Framework.Servers.BaseOpenSimServer.Startup() in
> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Framework\Servers\BaseOpenSimServer.cs:line
> 170
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users


--
OpenSim: 10 Region Standalone on 0.8.1 Dev
Physics: Open Dynamics Engine
OS: Windows 7 (x64)
CPU: AMD FX 8320 8-Core 3.5 GHz
Memory: 16 GB DDR3
Database: MySQL 5.1.63 (x64)

_______________________________________________
Opensim-users mailing list
[hidden email]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region can not start by Yengine error in dev version from yesterday

Luisillo Contepomi
Thank you for answer Chris.
Yes I have Net Framework 4.7.03062 installed.
Steps to reproduce it:
donwload the dev versión of today with git bash command $ git fetch
--force --all
runprebuild.bat
compile.bat
configure for grid with MySQL in a clean database, where you have all
privileges, using example files from:

/bin/Robust.ini.example
/bin/OpenSim.ini.example
/config-include/GridCommon.ini.example
/config-include/FlotsamCache.ini.example

Now run Robust.exe and then Opensim:exe
Opensim crash with the error reported.

Best regards,
Luisillo
El jue., 13 dic. 2018 a las 5:35, Chris (<[hidden email]>) escribió:

>
> Hello, I can't reproduce this on my setup using the latest master.
>
> "Compiled in Win7 Framework64\v4.0.30319" <-- Are you using .NET 4.0?
> The requirements for this was changed some months ago to require .NET
> 4.6 or higher on master. If you haven't upgraded to v4.6 I would try
> that and then compile again and see if it works. If you're already on
> .NET v4.6 it could be a case of an out of date file and I would try a
> fresh clone from master and copy the settings you need from your old
> setup and see if that works.
>
> Hope this helps! :)
>
> On 12/12/2018 7:56 AM, Luisillo Contepomi wrote:
> > Testing Grid with a region.
> > Robust.exe start without problems but region can not start.
> > Compiled in Win7 Framework64\v4.0.30319
> > No documentation about Yengine in opensimulator.org except a Chat log
> > with opinions but no information at all. I stop testing dev versions
> > waiting to new information
> >
> > Regards,
> > Luisillo
> >
> > ---Error in console----
> > 2018-12-12 14:46:55,351 INFO  [XEngine]: Script stop strategy is co-op
> > 2018-12-12 14:46:55,403 FATAL Fatal error:
> > System.Reflection.TargetInvocationException: Exception has been thrown
> > by the target of an invocation. --->
> > System.TypeInitializationException: The type initializer for
> > 'OpenSim.Region.ScriptEngine.Yengine.Yengine' threw an exception. --->
> > System.IO.FileLoadException: Could not load file or assembly 'log4net,
> > Version=2.0.8.0, Culture=neutral, PublicKeyToken=null' or one of its
> > dependencies. The located assembly's manifest definition does not
> > match the assembly reference. (Exception from HRESULT: 0x80131040)
> >     at OpenSim.Region.ScriptEngine.Yengine.Yengine..cctor()
> >     --- End of inner exception stack trace ---
> >     at OpenSim.Region.ScriptEngine.Yengine.Yengine..ctor()
> >     --- End of inner exception stack trace ---
> >     at System.RuntimeTypeHandle.CreateInstance(RuntimeType type,
> > Boolean publicOnly, Boolean noCheck, Boolean& canBeCached,
> > RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
> >     at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly,
> > Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
> >     at System.Activator.CreateInstance(Type type, Boolean nonPublic)
> >     at System.Activator.CreateInstance(Type type)
> >     at OpenSim.ApplicationPlugins.RegionModulesController.RegionModulesControllerPlugin.AddRegionToModules(Scene
> > scene) in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\RegionModulesController\RegionModulesControllerPlugin.cs:line
> > 395
> >     at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
> > portadd_flag, Boolean do_post_init, IScene& mscene) in
> > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> > 430
> >     at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
> > portadd_flag, IScene& scene) in
> > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> > 376
> >     at OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostInitialise()
> > in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\LoadRegions\LoadRegionsPlugin.cs:line
> > 130
> >     at OpenSim.OpenSimBase.StartupSpecific() in
> > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> > 285
> >     at OpenSim.OpenSim.StartupSpecific() in
> > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSim.cs:line
> > 211
> >     at OpenSim.Framework.Servers.BaseOpenSimServer.Startup() in
> > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Framework\Servers\BaseOpenSimServer.cs:line
> > 170
> > _______________________________________________
> > Opensim-users mailing list
> > [hidden email]
> > http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
>
>
> --
> OpenSim: 10 Region Standalone on 0.8.1 Dev
> Physics: Open Dynamics Engine
> OS: Windows 7 (x64)
> CPU: AMD FX 8320 8-Core 3.5 GHz
> Memory: 16 GB DDR3
> Database: MySQL 5.1.63 (x64)
>
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
_______________________________________________
Opensim-users mailing list
[hidden email]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region can not start by Yengine error in dev version from yesterday

Luisillo Contepomi
The last day work without problems was the last 10 december
I test all days. Last 3 days versions crash.
El jue., 13 dic. 2018 a las 10:55, Luisillo Contepomi
(<[hidden email]>) escribió:

>
> Thank you for answer Chris.
> Yes I have Net Framework 4.7.03062 installed.
> Steps to reproduce it:
> donwload the dev versión of today with git bash command $ git fetch
> --force --all
> runprebuild.bat
> compile.bat
> configure for grid with MySQL in a clean database, where you have all
> privileges, using example files from:
>
> /bin/Robust.ini.example
> /bin/OpenSim.ini.example
> /config-include/GridCommon.ini.example
> /config-include/FlotsamCache.ini.example
>
> Now run Robust.exe and then Opensim:exe
> Opensim crash with the error reported.
>
> Best regards,
> Luisillo
> El jue., 13 dic. 2018 a las 5:35, Chris (<[hidden email]>) escribió:
> >
> > Hello, I can't reproduce this on my setup using the latest master.
> >
> > "Compiled in Win7 Framework64\v4.0.30319" <-- Are you using .NET 4.0?
> > The requirements for this was changed some months ago to require .NET
> > 4.6 or higher on master. If you haven't upgraded to v4.6 I would try
> > that and then compile again and see if it works. If you're already on
> > .NET v4.6 it could be a case of an out of date file and I would try a
> > fresh clone from master and copy the settings you need from your old
> > setup and see if that works.
> >
> > Hope this helps! :)
> >
> > On 12/12/2018 7:56 AM, Luisillo Contepomi wrote:
> > > Testing Grid with a region.
> > > Robust.exe start without problems but region can not start.
> > > Compiled in Win7 Framework64\v4.0.30319
> > > No documentation about Yengine in opensimulator.org except a Chat log
> > > with opinions but no information at all. I stop testing dev versions
> > > waiting to new information
> > >
> > > Regards,
> > > Luisillo
> > >
> > > ---Error in console----
> > > 2018-12-12 14:46:55,351 INFO  [XEngine]: Script stop strategy is co-op
> > > 2018-12-12 14:46:55,403 FATAL Fatal error:
> > > System.Reflection.TargetInvocationException: Exception has been thrown
> > > by the target of an invocation. --->
> > > System.TypeInitializationException: The type initializer for
> > > 'OpenSim.Region.ScriptEngine.Yengine.Yengine' threw an exception. --->
> > > System.IO.FileLoadException: Could not load file or assembly 'log4net,
> > > Version=2.0.8.0, Culture=neutral, PublicKeyToken=null' or one of its
> > > dependencies. The located assembly's manifest definition does not
> > > match the assembly reference. (Exception from HRESULT: 0x80131040)
> > >     at OpenSim.Region.ScriptEngine.Yengine.Yengine..cctor()
> > >     --- End of inner exception stack trace ---
> > >     at OpenSim.Region.ScriptEngine.Yengine.Yengine..ctor()
> > >     --- End of inner exception stack trace ---
> > >     at System.RuntimeTypeHandle.CreateInstance(RuntimeType type,
> > > Boolean publicOnly, Boolean noCheck, Boolean& canBeCached,
> > > RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
> > >     at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly,
> > > Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
> > >     at System.Activator.CreateInstance(Type type, Boolean nonPublic)
> > >     at System.Activator.CreateInstance(Type type)
> > >     at OpenSim.ApplicationPlugins.RegionModulesController.RegionModulesControllerPlugin.AddRegionToModules(Scene
> > > scene) in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\RegionModulesController\RegionModulesControllerPlugin.cs:line
> > > 395
> > >     at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
> > > portadd_flag, Boolean do_post_init, IScene& mscene) in
> > > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> > > 430
> > >     at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
> > > portadd_flag, IScene& scene) in
> > > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> > > 376
> > >     at OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostInitialise()
> > > in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\LoadRegions\LoadRegionsPlugin.cs:line
> > > 130
> > >     at OpenSim.OpenSimBase.StartupSpecific() in
> > > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> > > 285
> > >     at OpenSim.OpenSim.StartupSpecific() in
> > > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSim.cs:line
> > > 211
> > >     at OpenSim.Framework.Servers.BaseOpenSimServer.Startup() in
> > > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Framework\Servers\BaseOpenSimServer.cs:line
> > > 170
> > > _______________________________________________
> > > Opensim-users mailing list
> > > [hidden email]
> > > http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
> >
> >
> > --
> > OpenSim: 10 Region Standalone on 0.8.1 Dev
> > Physics: Open Dynamics Engine
> > OS: Windows 7 (x64)
> > CPU: AMD FX 8320 8-Core 3.5 GHz
> > Memory: 16 GB DDR3
> > Database: MySQL 5.1.63 (x64)
> >
> > _______________________________________________
> > Opensim-users mailing list
> > [hidden email]
> > http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
_______________________________________________
Opensim-users mailing list
[hidden email]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region can not start by Yengine error in dev version from yesterday

Luisillo Contepomi
Yengine is a secret. No information in wiki modules or other wiki section
Only some mentions in dev meeting chat, but only personal opinions.
No tech information at all.
And in Mantis, some devs has solved problems with this secret YEngine.
#8407,#8421,

but....in OpenSimDefaults.ini you can read:
    ;; Default script engine to use. Currently, we only have XEngine
    DefaultScriptEngine = "XEngine"

May be is a Christmas gift discovered before the date?
--
Luisillo
El jue., 13 dic. 2018 a las 11:13, Luisillo Contepomi
(<[hidden email]>) escribió:

>
> The last day work without problems was the last 10 december
> I test all days. Last 3 days versions crash.
> El jue., 13 dic. 2018 a las 10:55, Luisillo Contepomi
> (<[hidden email]>) escribió:
> >
> > Thank you for answer Chris.
> > Yes I have Net Framework 4.7.03062 installed.
> > Steps to reproduce it:
> > donwload the dev versión of today with git bash command $ git fetch
> > --force --all
> > runprebuild.bat
> > compile.bat
> > configure for grid with MySQL in a clean database, where you have all
> > privileges, using example files from:
> >
> > /bin/Robust.ini.example
> > /bin/OpenSim.ini.example
> > /config-include/GridCommon.ini.example
> > /config-include/FlotsamCache.ini.example
> >
> > Now run Robust.exe and then Opensim:exe
> > Opensim crash with the error reported.
> >
> > Best regards,
> > Luisillo
> > El jue., 13 dic. 2018 a las 5:35, Chris (<[hidden email]>) escribió:
> > >
> > > Hello, I can't reproduce this on my setup using the latest master.
> > >
> > > "Compiled in Win7 Framework64\v4.0.30319" <-- Are you using .NET 4.0?
> > > The requirements for this was changed some months ago to require .NET
> > > 4.6 or higher on master. If you haven't upgraded to v4.6 I would try
> > > that and then compile again and see if it works. If you're already on
> > > .NET v4.6 it could be a case of an out of date file and I would try a
> > > fresh clone from master and copy the settings you need from your old
> > > setup and see if that works.
> > >
> > > Hope this helps! :)
> > >
> > > On 12/12/2018 7:56 AM, Luisillo Contepomi wrote:
> > > > Testing Grid with a region.
> > > > Robust.exe start without problems but region can not start.
> > > > Compiled in Win7 Framework64\v4.0.30319
> > > > No documentation about Yengine in opensimulator.org except a Chat log
> > > > with opinions but no information at all. I stop testing dev versions
> > > > waiting to new information
> > > >
> > > > Regards,
> > > > Luisillo
> > > >
> > > > ---Error in console----
> > > > 2018-12-12 14:46:55,351 INFO  [XEngine]: Script stop strategy is co-op
> > > > 2018-12-12 14:46:55,403 FATAL Fatal error:
> > > > System.Reflection.TargetInvocationException: Exception has been thrown
> > > > by the target of an invocation. --->
> > > > System.TypeInitializationException: The type initializer for
> > > > 'OpenSim.Region.ScriptEngine.Yengine.Yengine' threw an exception. --->
> > > > System.IO.FileLoadException: Could not load file or assembly 'log4net,
> > > > Version=2.0.8.0, Culture=neutral, PublicKeyToken=null' or one of its
> > > > dependencies. The located assembly's manifest definition does not
> > > > match the assembly reference. (Exception from HRESULT: 0x80131040)
> > > >     at OpenSim.Region.ScriptEngine.Yengine.Yengine..cctor()
> > > >     --- End of inner exception stack trace ---
> > > >     at OpenSim.Region.ScriptEngine.Yengine.Yengine..ctor()
> > > >     --- End of inner exception stack trace ---
> > > >     at System.RuntimeTypeHandle.CreateInstance(RuntimeType type,
> > > > Boolean publicOnly, Boolean noCheck, Boolean& canBeCached,
> > > > RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
> > > >     at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly,
> > > > Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
> > > >     at System.Activator.CreateInstance(Type type, Boolean nonPublic)
> > > >     at System.Activator.CreateInstance(Type type)
> > > >     at OpenSim.ApplicationPlugins.RegionModulesController.RegionModulesControllerPlugin.AddRegionToModules(Scene
> > > > scene) in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\RegionModulesController\RegionModulesControllerPlugin.cs:line
> > > > 395
> > > >     at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
> > > > portadd_flag, Boolean do_post_init, IScene& mscene) in
> > > > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> > > > 430
> > > >     at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
> > > > portadd_flag, IScene& scene) in
> > > > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> > > > 376
> > > >     at OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostInitialise()
> > > > in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\LoadRegions\LoadRegionsPlugin.cs:line
> > > > 130
> > > >     at OpenSim.OpenSimBase.StartupSpecific() in
> > > > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> > > > 285
> > > >     at OpenSim.OpenSim.StartupSpecific() in
> > > > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSim.cs:line
> > > > 211
> > > >     at OpenSim.Framework.Servers.BaseOpenSimServer.Startup() in
> > > > x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Framework\Servers\BaseOpenSimServer.cs:line
> > > > 170
> > > > _______________________________________________
> > > > Opensim-users mailing list
> > > > [hidden email]
> > > > http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
> > >
> > >
> > > --
> > > OpenSim: 10 Region Standalone on 0.8.1 Dev
> > > Physics: Open Dynamics Engine
> > > OS: Windows 7 (x64)
> > > CPU: AMD FX 8320 8-Core 3.5 GHz
> > > Memory: 16 GB DDR3
> > > Database: MySQL 5.1.63 (x64)
> > >
> > > _______________________________________________
> > > Opensim-users mailing list
> > > [hidden email]
> > > http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
_______________________________________________
Opensim-users mailing list
[hidden email]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region can not start by Yengine error in dev version from yesterday

AJLDuarte
In reply to this post by Luisillo Contepomi
- Make sure you have the files OpenSim.exe.config, Robust.exe.config,
OpenSim.exe.config  and Opensim32.exe.config as in our repo

They now seem to get changed on same compilations :(

- windows .net framework does provide a msbuild tool, but for ms reasons
it is a outdated one for .net4.0 - 4.5

and c# version 5 or so.

The "proper" msbuild is the one provided with VS2017 (all .net 4.x; c# 7.3)

so plz install vs2017 free version at least to avoid issues.

- looking to your information down:

Region Standalone on 0.8.1 Dev ???

hope that is a typo :p

Ubit


On 13-Dec-18 10:13, Luisillo Contepomi wrote:

> The last day work without problems was the last 10 december
> I test all days. Last 3 days versions crash.
> El jue., 13 dic. 2018 a las 10:55, Luisillo Contepomi
> (<[hidden email]>) escribió:
>> Thank you for answer Chris.
>> Yes I have Net Framework 4.7.03062 installed.
>> Steps to reproduce it:
>> donwload the dev versión of today with git bash command $ git fetch
>> --force --all
>> runprebuild.bat
>> compile.bat
>> configure for grid with MySQL in a clean database, where you have all
>> privileges, using example files from:
>>
>> /bin/Robust.ini.example
>> /bin/OpenSim.ini.example
>> /config-include/GridCommon.ini.example
>> /config-include/FlotsamCache.ini.example
>>
>> Now run Robust.exe and then Opensim:exe
>> Opensim crash with the error reported.
>>
>> Best regards,
>> Luisillo
>> El jue., 13 dic. 2018 a las 5:35, Chris (<[hidden email]>) escribió:
>>> Hello, I can't reproduce this on my setup using the latest master.
>>>
>>> "Compiled in Win7 Framework64\v4.0.30319" <-- Are you using .NET 4.0?
>>> The requirements for this was changed some months ago to require .NET
>>> 4.6 or higher on master. If you haven't upgraded to v4.6 I would try
>>> that and then compile again and see if it works. If you're already on
>>> .NET v4.6 it could be a case of an out of date file and I would try a
>>> fresh clone from master and copy the settings you need from your old
>>> setup and see if that works.
>>>
>>> Hope this helps! :)
>>>
>>> On 12/12/2018 7:56 AM, Luisillo Contepomi wrote:
>>>> Testing Grid with a region.
>>>> Robust.exe start without problems but region can not start.
>>>> Compiled in Win7 Framework64\v4.0.30319
>>>> No documentation about Yengine in opensimulator.org except a Chat log
>>>> with opinions but no information at all. I stop testing dev versions
>>>> waiting to new information
>>>>
>>>> Regards,
>>>> Luisillo
>>>>
>>>> ---Error in console----
>>>> 2018-12-12 14:46:55,351 INFO  [XEngine]: Script stop strategy is co-op
>>>> 2018-12-12 14:46:55,403 FATAL Fatal error:
>>>> System.Reflection.TargetInvocationException: Exception has been thrown
>>>> by the target of an invocation. --->
>>>> System.TypeInitializationException: The type initializer for
>>>> 'OpenSim.Region.ScriptEngine.Yengine.Yengine' threw an exception. --->
>>>> System.IO.FileLoadException: Could not load file or assembly 'log4net,
>>>> Version=2.0.8.0, Culture=neutral, PublicKeyToken=null' or one of its
>>>> dependencies. The located assembly's manifest definition does not
>>>> match the assembly reference. (Exception from HRESULT: 0x80131040)
>>>>      at OpenSim.Region.ScriptEngine.Yengine.Yengine..cctor()
>>>>      --- End of inner exception stack trace ---
>>>>      at OpenSim.Region.ScriptEngine.Yengine.Yengine..ctor()
>>>>      --- End of inner exception stack trace ---
>>>>      at System.RuntimeTypeHandle.CreateInstance(RuntimeType type,
>>>> Boolean publicOnly, Boolean noCheck, Boolean& canBeCached,
>>>> RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
>>>>      at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly,
>>>> Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
>>>>      at System.Activator.CreateInstance(Type type, Boolean nonPublic)
>>>>      at System.Activator.CreateInstance(Type type)
>>>>      at OpenSim.ApplicationPlugins.RegionModulesController.RegionModulesControllerPlugin.AddRegionToModules(Scene
>>>> scene) in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\RegionModulesController\RegionModulesControllerPlugin.cs:line
>>>> 395
>>>>      at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
>>>> portadd_flag, Boolean do_post_init, IScene& mscene) in
>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
>>>> 430
>>>>      at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
>>>> portadd_flag, IScene& scene) in
>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
>>>> 376
>>>>      at OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostInitialise()
>>>> in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\LoadRegions\LoadRegionsPlugin.cs:line
>>>> 130
>>>>      at OpenSim.OpenSimBase.StartupSpecific() in
>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
>>>> 285
>>>>      at OpenSim.OpenSim.StartupSpecific() in
>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSim.cs:line
>>>> 211
>>>>      at OpenSim.Framework.Servers.BaseOpenSimServer.Startup() in
>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Framework\Servers\BaseOpenSimServer.cs:line
>>>> 170
>>>> _______________________________________________
>>>> Opensim-users mailing list
>>>> [hidden email]
>>>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
>>>
>>> --
>>> OpenSim: 10 Region Standalone on 0.8.1 Dev
>>> Physics: Open Dynamics Engine
>>> OS: Windows 7 (x64)
>>> CPU: AMD FX 8320 8-Core 3.5 GHz
>>> Memory: 16 GB DDR3
>>> Database: MySQL 5.1.63 (x64)
>>>
>>> _______________________________________________
>>> Opensim-users mailing list
>>> [hidden email]
>>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
_______________________________________________
Opensim-users mailing list
[hidden email]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region can not start by Yengine error in dev version from yesterday

Chris M
In reply to this post by Luisillo Contepomi
YEngine is a new script engine as an alternative to XEngine. It offers
benefits over XEngine such as micro-threading, better performance,
faster script compile times, and a stricter script syntax that's
supposed to be closer along the lines of SL; but right now as far as I
know it's generally not recommended to use YEngine on a daily basis
except for testing and bug reporting for it. It's not "secret" so much
as no one talks about it a whole lot (yet) due to the fact that it's
still in its experimental stage and it wouldn't be a good idea for
everyone to go switching over to it and possibly breaking their sims ;)

As far as the crashing issue is concerned though; I am unsure why
YEngine would be involved in it if you haven't set up your OpenSim
install to use it. I have pulled the very latest master code today and
tried it with both XEngine and YEngine with no crashes. It's set up in a
standard grid mode configuration though (Not HG).

On 12/13/2018 5:04 AM, Luisillo Contepomi wrote:

> Yengine is a secret. No information in wiki modules or other wiki section
> Only some mentions in dev meeting chat, but only personal opinions.
> No tech information at all.
> And in Mantis, some devs has solved problems with this secret YEngine.
> #8407,#8421,
>
> but....in OpenSimDefaults.ini you can read:
>      ;; Default script engine to use. Currently, we only have XEngine
>      DefaultScriptEngine = "XEngine"
>
> May be is a Christmas gift discovered before the date?
> --
> Luisillo
> El jue., 13 dic. 2018 a las 11:13, Luisillo Contepomi
> (<[hidden email]>) escribió:
>> The last day work without problems was the last 10 december
>> I test all days. Last 3 days versions crash.
>> El jue., 13 dic. 2018 a las 10:55, Luisillo Contepomi
>> (<[hidden email]>) escribió:
>>> Thank you for answer Chris.
>>> Yes I have Net Framework 4.7.03062 installed.
>>> Steps to reproduce it:
>>> donwload the dev versión of today with git bash command $ git fetch
>>> --force --all
>>> runprebuild.bat
>>> compile.bat
>>> configure for grid with MySQL in a clean database, where you have all
>>> privileges, using example files from:
>>>
>>> /bin/Robust.ini.example
>>> /bin/OpenSim.ini.example
>>> /config-include/GridCommon.ini.example
>>> /config-include/FlotsamCache.ini.example
>>>
>>> Now run Robust.exe and then Opensim:exe
>>> Opensim crash with the error reported.
>>>
>>> Best regards,
>>> Luisillo
>>> El jue., 13 dic. 2018 a las 5:35, Chris (<[hidden email]>) escribió:
>>>> Hello, I can't reproduce this on my setup using the latest master.
>>>>
>>>> "Compiled in Win7 Framework64\v4.0.30319" <-- Are you using .NET 4.0?
>>>> The requirements for this was changed some months ago to require .NET
>>>> 4.6 or higher on master. If you haven't upgraded to v4.6 I would try
>>>> that and then compile again and see if it works. If you're already on
>>>> .NET v4.6 it could be a case of an out of date file and I would try a
>>>> fresh clone from master and copy the settings you need from your old
>>>> setup and see if that works.
>>>>
>>>> Hope this helps! :)
>>>>
>>>> On 12/12/2018 7:56 AM, Luisillo Contepomi wrote:
>>>>> Testing Grid with a region.
>>>>> Robust.exe start without problems but region can not start.
>>>>> Compiled in Win7 Framework64\v4.0.30319
>>>>> No documentation about Yengine in opensimulator.org except a Chat log
>>>>> with opinions but no information at all. I stop testing dev versions
>>>>> waiting to new information
>>>>>
>>>>> Regards,
>>>>> Luisillo
>>>>>
>>>>> ---Error in console----
>>>>> 2018-12-12 14:46:55,351 INFO  [XEngine]: Script stop strategy is co-op
>>>>> 2018-12-12 14:46:55,403 FATAL Fatal error:
>>>>> System.Reflection.TargetInvocationException: Exception has been thrown
>>>>> by the target of an invocation. --->
>>>>> System.TypeInitializationException: The type initializer for
>>>>> 'OpenSim.Region.ScriptEngine.Yengine.Yengine' threw an exception. --->
>>>>> System.IO.FileLoadException: Could not load file or assembly 'log4net,
>>>>> Version=2.0.8.0, Culture=neutral, PublicKeyToken=null' or one of its
>>>>> dependencies. The located assembly's manifest definition does not
>>>>> match the assembly reference. (Exception from HRESULT: 0x80131040)
>>>>>      at OpenSim.Region.ScriptEngine.Yengine.Yengine..cctor()
>>>>>      --- End of inner exception stack trace ---
>>>>>      at OpenSim.Region.ScriptEngine.Yengine.Yengine..ctor()
>>>>>      --- End of inner exception stack trace ---
>>>>>      at System.RuntimeTypeHandle.CreateInstance(RuntimeType type,
>>>>> Boolean publicOnly, Boolean noCheck, Boolean& canBeCached,
>>>>> RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
>>>>>      at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly,
>>>>> Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
>>>>>      at System.Activator.CreateInstance(Type type, Boolean nonPublic)
>>>>>      at System.Activator.CreateInstance(Type type)
>>>>>      at OpenSim.ApplicationPlugins.RegionModulesController.RegionModulesControllerPlugin.AddRegionToModules(Scene
>>>>> scene) in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\RegionModulesController\RegionModulesControllerPlugin.cs:line
>>>>> 395
>>>>>      at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
>>>>> portadd_flag, Boolean do_post_init, IScene& mscene) in
>>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
>>>>> 430
>>>>>      at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
>>>>> portadd_flag, IScene& scene) in
>>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
>>>>> 376
>>>>>      at OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostInitialise()
>>>>> in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\LoadRegions\LoadRegionsPlugin.cs:line
>>>>> 130
>>>>>      at OpenSim.OpenSimBase.StartupSpecific() in
>>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
>>>>> 285
>>>>>      at OpenSim.OpenSim.StartupSpecific() in
>>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSim.cs:line
>>>>> 211
>>>>>      at OpenSim.Framework.Servers.BaseOpenSimServer.Startup() in
>>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Framework\Servers\BaseOpenSimServer.cs:line
>>>>> 170
>>>>> _______________________________________________
>>>>> Opensim-users mailing list
>>>>> [hidden email]
>>>>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
>>>>
>>>> --
>>>> OpenSim: 10 Region Standalone on 0.8.1 Dev
>>>> Physics: Open Dynamics Engine
>>>> OS: Windows 7 (x64)
>>>> CPU: AMD FX 8320 8-Core 3.5 GHz
>>>> Memory: 16 GB DDR3
>>>> Database: MySQL 5.1.63 (x64)
>>>>
>>>> _______________________________________________
>>>> Opensim-users mailing list
>>>> [hidden email]
>>>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users


--
OpenSim: 10 Region Standalone on 0.8.1 Dev
Physics: Open Dynamics Engine
OS: Windows 7 (x64)
CPU: AMD FX 8320 8-Core 3.5 GHz
Memory: 16 GB DDR3
Database: MySQL 5.1.63 (x64)

_______________________________________________
Opensim-users mailing list
[hidden email]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region can not start by Yengine error in dev version from yesterday

Luisillo Contepomi
ooooh then if have "micro-threading, better performance,
faster script compile times, and a stricter script syntax that's
supposed to be closer along the lines of SL and need tests!... is my
Christmas gift!
I am installing Visual Studio 2017 and ill test all again.
Thank you very much!
El jue., 13 dic. 2018 a las 14:45, Chris (<[hidden email]>) escribió:

>
> YEngine is a new script engine as an alternative to XEngine. It offers
> benefits over XEngine such as micro-threading, better performance,
> faster script compile times, and a stricter script syntax that's
> supposed to be closer along the lines of SL; but right now as far as I
> know it's generally not recommended to use YEngine on a daily basis
> except for testing and bug reporting for it. It's not "secret" so much
> as no one talks about it a whole lot (yet) due to the fact that it's
> still in its experimental stage and it wouldn't be a good idea for
> everyone to go switching over to it and possibly breaking their sims ;)
>
> As far as the crashing issue is concerned though; I am unsure why
> YEngine would be involved in it if you haven't set up your OpenSim
> install to use it. I have pulled the very latest master code today and
> tried it with both XEngine and YEngine with no crashes. It's set up in a
> standard grid mode configuration though (Not HG).
>
> On 12/13/2018 5:04 AM, Luisillo Contepomi wrote:
> > Yengine is a secret. No information in wiki modules or other wiki section
> > Only some mentions in dev meeting chat, but only personal opinions.
> > No tech information at all.
> > And in Mantis, some devs has solved problems with this secret YEngine.
> > #8407,#8421,
> >
> > but....in OpenSimDefaults.ini you can read:
> >      ;; Default script engine to use. Currently, we only have XEngine
> >      DefaultScriptEngine = "XEngine"
> >
> > May be is a Christmas gift discovered before the date?
> > --
> > Luisillo
> > El jue., 13 dic. 2018 a las 11:13, Luisillo Contepomi
> > (<[hidden email]>) escribió:
> >> The last day work without problems was the last 10 december
> >> I test all days. Last 3 days versions crash.
> >> El jue., 13 dic. 2018 a las 10:55, Luisillo Contepomi
> >> (<[hidden email]>) escribió:
> >>> Thank you for answer Chris.
> >>> Yes I have Net Framework 4.7.03062 installed.
> >>> Steps to reproduce it:
> >>> donwload the dev versión of today with git bash command $ git fetch
> >>> --force --all
> >>> runprebuild.bat
> >>> compile.bat
> >>> configure for grid with MySQL in a clean database, where you have all
> >>> privileges, using example files from:
> >>>
> >>> /bin/Robust.ini.example
> >>> /bin/OpenSim.ini.example
> >>> /config-include/GridCommon.ini.example
> >>> /config-include/FlotsamCache.ini.example
> >>>
> >>> Now run Robust.exe and then Opensim:exe
> >>> Opensim crash with the error reported.
> >>>
> >>> Best regards,
> >>> Luisillo
> >>> El jue., 13 dic. 2018 a las 5:35, Chris (<[hidden email]>) escribió:
> >>>> Hello, I can't reproduce this on my setup using the latest master.
> >>>>
> >>>> "Compiled in Win7 Framework64\v4.0.30319" <-- Are you using .NET 4.0?
> >>>> The requirements for this was changed some months ago to require .NET
> >>>> 4.6 or higher on master. If you haven't upgraded to v4.6 I would try
> >>>> that and then compile again and see if it works. If you're already on
> >>>> .NET v4.6 it could be a case of an out of date file and I would try a
> >>>> fresh clone from master and copy the settings you need from your old
> >>>> setup and see if that works.
> >>>>
> >>>> Hope this helps! :)
> >>>>
> >>>> On 12/12/2018 7:56 AM, Luisillo Contepomi wrote:
> >>>>> Testing Grid with a region.
> >>>>> Robust.exe start without problems but region can not start.
> >>>>> Compiled in Win7 Framework64\v4.0.30319
> >>>>> No documentation about Yengine in opensimulator.org except a Chat log
> >>>>> with opinions but no information at all. I stop testing dev versions
> >>>>> waiting to new information
> >>>>>
> >>>>> Regards,
> >>>>> Luisillo
> >>>>>
> >>>>> ---Error in console----
> >>>>> 2018-12-12 14:46:55,351 INFO  [XEngine]: Script stop strategy is co-op
> >>>>> 2018-12-12 14:46:55,403 FATAL Fatal error:
> >>>>> System.Reflection.TargetInvocationException: Exception has been thrown
> >>>>> by the target of an invocation. --->
> >>>>> System.TypeInitializationException: The type initializer for
> >>>>> 'OpenSim.Region.ScriptEngine.Yengine.Yengine' threw an exception. --->
> >>>>> System.IO.FileLoadException: Could not load file or assembly 'log4net,
> >>>>> Version=2.0.8.0, Culture=neutral, PublicKeyToken=null' or one of its
> >>>>> dependencies. The located assembly's manifest definition does not
> >>>>> match the assembly reference. (Exception from HRESULT: 0x80131040)
> >>>>>      at OpenSim.Region.ScriptEngine.Yengine.Yengine..cctor()
> >>>>>      --- End of inner exception stack trace ---
> >>>>>      at OpenSim.Region.ScriptEngine.Yengine.Yengine..ctor()
> >>>>>      --- End of inner exception stack trace ---
> >>>>>      at System.RuntimeTypeHandle.CreateInstance(RuntimeType type,
> >>>>> Boolean publicOnly, Boolean noCheck, Boolean& canBeCached,
> >>>>> RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
> >>>>>      at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly,
> >>>>> Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
> >>>>>      at System.Activator.CreateInstance(Type type, Boolean nonPublic)
> >>>>>      at System.Activator.CreateInstance(Type type)
> >>>>>      at OpenSim.ApplicationPlugins.RegionModulesController.RegionModulesControllerPlugin.AddRegionToModules(Scene
> >>>>> scene) in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\RegionModulesController\RegionModulesControllerPlugin.cs:line
> >>>>> 395
> >>>>>      at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
> >>>>> portadd_flag, Boolean do_post_init, IScene& mscene) in
> >>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> >>>>> 430
> >>>>>      at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
> >>>>> portadd_flag, IScene& scene) in
> >>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> >>>>> 376
> >>>>>      at OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostInitialise()
> >>>>> in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\LoadRegions\LoadRegionsPlugin.cs:line
> >>>>> 130
> >>>>>      at OpenSim.OpenSimBase.StartupSpecific() in
> >>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> >>>>> 285
> >>>>>      at OpenSim.OpenSim.StartupSpecific() in
> >>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSim.cs:line
> >>>>> 211
> >>>>>      at OpenSim.Framework.Servers.BaseOpenSimServer.Startup() in
> >>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Framework\Servers\BaseOpenSimServer.cs:line
> >>>>> 170
> >>>>> _______________________________________________
> >>>>> Opensim-users mailing list
> >>>>> [hidden email]
> >>>>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
> >>>>
> >>>> --
> >>>> OpenSim: 10 Region Standalone on 0.8.1 Dev
> >>>> Physics: Open Dynamics Engine
> >>>> OS: Windows 7 (x64)
> >>>> CPU: AMD FX 8320 8-Core 3.5 GHz
> >>>> Memory: 16 GB DDR3
> >>>> Database: MySQL 5.1.63 (x64)
> >>>>
> >>>> _______________________________________________
> >>>> Opensim-users mailing list
> >>>> [hidden email]
> >>>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
> > _______________________________________________
> > Opensim-users mailing list
> > [hidden email]
> > http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
>
>
> --
> OpenSim: 10 Region Standalone on 0.8.1 Dev
> Physics: Open Dynamics Engine
> OS: Windows 7 (x64)
> CPU: AMD FX 8320 8-Core 3.5 GHz
> Memory: 16 GB DDR3
> Database: MySQL 5.1.63 (x64)
>
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
_______________________________________________
Opensim-users mailing list
[hidden email]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region can not start by Yengine error in dev version from yesterday

Luisillo Contepomi
In reply to this post by AJLDuarte
Hello Ubit, Thank you for answer,
I have not problems compiling. Compile without errors. As always in
0.9.0.1 dev .
Now I am installing Visual Studio 2017 and testing with all totally new.
Obrigado.
Luisillo


El jue., 13 dic. 2018 a las 14:34, Leal Duarte (<[hidden email]>) escribió:

>
> - Make sure you have the files OpenSim.exe.config, Robust.exe.config,
> OpenSim.exe.config  and Opensim32.exe.config as in our repo
>
> They now seem to get changed on same compilations :(
>
> - windows .net framework does provide a msbuild tool, but for ms reasons
> it is a outdated one for .net4.0 - 4.5
>
> and c# version 5 or so.
>
> The "proper" msbuild is the one provided with VS2017 (all .net 4.x; c# 7.3)
>
> so plz install vs2017 free version at least to avoid issues.
>
> - looking to your information down:
>
> Region Standalone on 0.8.1 Dev ???
>
> hope that is a typo :p
>
> Ubit
>
>
> On 13-Dec-18 10:13, Luisillo Contepomi wrote:
> > The last day work without problems was the last 10 december
> > I test all days. Last 3 days versions crash.
> > El jue., 13 dic. 2018 a las 10:55, Luisillo Contepomi
> > (<[hidden email]>) escribió:
> >> Thank you for answer Chris.
> >> Yes I have Net Framework 4.7.03062 installed.
> >> Steps to reproduce it:
> >> donwload the dev versión of today with git bash command $ git fetch
> >> --force --all
> >> runprebuild.bat
> >> compile.bat
> >> configure for grid with MySQL in a clean database, where you have all
> >> privileges, using example files from:
> >>
> >> /bin/Robust.ini.example
> >> /bin/OpenSim.ini.example
> >> /config-include/GridCommon.ini.example
> >> /config-include/FlotsamCache.ini.example
> >>
> >> Now run Robust.exe and then Opensim:exe
> >> Opensim crash with the error reported.
> >>
> >> Best regards,
> >> Luisillo
> >> El jue., 13 dic. 2018 a las 5:35, Chris (<[hidden email]>) escribió:
> >>> Hello, I can't reproduce this on my setup using the latest master.
> >>>
> >>> "Compiled in Win7 Framework64\v4.0.30319" <-- Are you using .NET 4.0?
> >>> The requirements for this was changed some months ago to require .NET
> >>> 4.6 or higher on master. If you haven't upgraded to v4.6 I would try
> >>> that and then compile again and see if it works. If you're already on
> >>> .NET v4.6 it could be a case of an out of date file and I would try a
> >>> fresh clone from master and copy the settings you need from your old
> >>> setup and see if that works.
> >>>
> >>> Hope this helps! :)
> >>>
> >>> On 12/12/2018 7:56 AM, Luisillo Contepomi wrote:
> >>>> Testing Grid with a region.
> >>>> Robust.exe start without problems but region can not start.
> >>>> Compiled in Win7 Framework64\v4.0.30319
> >>>> No documentation about Yengine in opensimulator.org except a Chat log
> >>>> with opinions but no information at all. I stop testing dev versions
> >>>> waiting to new information
> >>>>
> >>>> Regards,
> >>>> Luisillo
> >>>>
> >>>> ---Error in console----
> >>>> 2018-12-12 14:46:55,351 INFO  [XEngine]: Script stop strategy is co-op
> >>>> 2018-12-12 14:46:55,403 FATAL Fatal error:
> >>>> System.Reflection.TargetInvocationException: Exception has been thrown
> >>>> by the target of an invocation. --->
> >>>> System.TypeInitializationException: The type initializer for
> >>>> 'OpenSim.Region.ScriptEngine.Yengine.Yengine' threw an exception. --->
> >>>> System.IO.FileLoadException: Could not load file or assembly 'log4net,
> >>>> Version=2.0.8.0, Culture=neutral, PublicKeyToken=null' or one of its
> >>>> dependencies. The located assembly's manifest definition does not
> >>>> match the assembly reference. (Exception from HRESULT: 0x80131040)
> >>>>      at OpenSim.Region.ScriptEngine.Yengine.Yengine..cctor()
> >>>>      --- End of inner exception stack trace ---
> >>>>      at OpenSim.Region.ScriptEngine.Yengine.Yengine..ctor()
> >>>>      --- End of inner exception stack trace ---
> >>>>      at System.RuntimeTypeHandle.CreateInstance(RuntimeType type,
> >>>> Boolean publicOnly, Boolean noCheck, Boolean& canBeCached,
> >>>> RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
> >>>>      at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly,
> >>>> Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
> >>>>      at System.Activator.CreateInstance(Type type, Boolean nonPublic)
> >>>>      at System.Activator.CreateInstance(Type type)
> >>>>      at OpenSim.ApplicationPlugins.RegionModulesController.RegionModulesControllerPlugin.AddRegionToModules(Scene
> >>>> scene) in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\RegionModulesController\RegionModulesControllerPlugin.cs:line
> >>>> 395
> >>>>      at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
> >>>> portadd_flag, Boolean do_post_init, IScene& mscene) in
> >>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> >>>> 430
> >>>>      at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
> >>>> portadd_flag, IScene& scene) in
> >>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> >>>> 376
> >>>>      at OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostInitialise()
> >>>> in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\LoadRegions\LoadRegionsPlugin.cs:line
> >>>> 130
> >>>>      at OpenSim.OpenSimBase.StartupSpecific() in
> >>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
> >>>> 285
> >>>>      at OpenSim.OpenSim.StartupSpecific() in
> >>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSim.cs:line
> >>>> 211
> >>>>      at OpenSim.Framework.Servers.BaseOpenSimServer.Startup() in
> >>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Framework\Servers\BaseOpenSimServer.cs:line
> >>>> 170
> >>>> _______________________________________________
> >>>> Opensim-users mailing list
> >>>> [hidden email]
> >>>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
> >>>
> >>> --
> >>> OpenSim: 10 Region Standalone on 0.8.1 Dev
> >>> Physics: Open Dynamics Engine
> >>> OS: Windows 7 (x64)
> >>> CPU: AMD FX 8320 8-Core 3.5 GHz
> >>> Memory: 16 GB DDR3
> >>> Database: MySQL 5.1.63 (x64)
> >>>
> >>> _______________________________________________
> >>> Opensim-users mailing list
> >>> [hidden email]
> >>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
> > _______________________________________________
> > Opensim-users mailing list
> > [hidden email]
> > http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
_______________________________________________
Opensim-users mailing list
[hidden email]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region can not start by Yengine error in dev version from yesterday

Luisillo Contepomi
Hi Ubit,
I compile new with VS2017 as before with alerts but no errors.
Build succeeded.

"X:\0.9.0.1dev\opensimdev\test\OpenSim.sln" (default target) (1) ->
"X:\0.9.0.1dev\opensimdev\test\OpenSim\Region\CoreModules\OpenSim.Region.CoreMo
dules.Tests.csproj" (default target) (46) ->
"X:\0.9.0.1dev\opensimdev\test\OpenSim\Region\ScriptEngine\XEngine\OpenSim.Regi
on.ScriptEngine.XEngine.csproj" (default target) (47:2) ->
"X:\0.9.0.1dev\opensimdev\test\OpenSim\Region\ScriptEngine\Shared\CodeTools\Ope
nSim.Region.ScriptEngine.Shared.CodeTools.csproj" (default target) (50:2) ->
(CoreCompile target) ->
  lsl.lexer.cs(19729,7): warning CS0162: Unreachable code detected [X:\0.9.0.1d
ev\opensimdev\test\OpenSim\Region\ScriptEngine\Shared\CodeTools\OpenSim.Region.
ScriptEngine.Shared.CodeTools.csproj]

    1 Warning(s)
    0 Error(s)

Region start.
Thank you.
_______________________________________________
Opensim-users mailing list
[hidden email]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region can not start by Yengine error in dev version from yesterday

Chris M
In reply to this post by Luisillo Contepomi
You're very welcome! If you would like to test on YEngine I would
strongly recommend not doing that on your production server. If it
happens to break your scripts you could have a hard time switching back
over to XEngine as currently it seems to get really confused when you do
that as explained in this mantis
http://opensimulator.org/mantis/view.php?id=8407 . It would be better to
test this on a database that you're not afraid to lose and start over
from scratch on.

On 12/13/2018 8:24 AM, Luisillo Contepomi wrote:

> ooooh then if have "micro-threading, better performance,
> faster script compile times, and a stricter script syntax that's
> supposed to be closer along the lines of SL and need tests!... is my
> Christmas gift!
> I am installing Visual Studio 2017 and ill test all again.
> Thank you very much!
> El jue., 13 dic. 2018 a las 14:45, Chris (<[hidden email]>) escribió:
>> YEngine is a new script engine as an alternative to XEngine. It offers
>> benefits over XEngine such as micro-threading, better performance,
>> faster script compile times, and a stricter script syntax that's
>> supposed to be closer along the lines of SL; but right now as far as I
>> know it's generally not recommended to use YEngine on a daily basis
>> except for testing and bug reporting for it. It's not "secret" so much
>> as no one talks about it a whole lot (yet) due to the fact that it's
>> still in its experimental stage and it wouldn't be a good idea for
>> everyone to go switching over to it and possibly breaking their sims ;)
>>
>> As far as the crashing issue is concerned though; I am unsure why
>> YEngine would be involved in it if you haven't set up your OpenSim
>> install to use it. I have pulled the very latest master code today and
>> tried it with both XEngine and YEngine with no crashes. It's set up in a
>> standard grid mode configuration though (Not HG).
>>
>> On 12/13/2018 5:04 AM, Luisillo Contepomi wrote:
>>> Yengine is a secret. No information in wiki modules or other wiki section
>>> Only some mentions in dev meeting chat, but only personal opinions.
>>> No tech information at all.
>>> And in Mantis, some devs has solved problems with this secret YEngine.
>>> #8407,#8421,
>>>
>>> but....in OpenSimDefaults.ini you can read:
>>>       ;; Default script engine to use. Currently, we only have XEngine
>>>       DefaultScriptEngine = "XEngine"
>>>
>>> May be is a Christmas gift discovered before the date?
>>> --
>>> Luisillo
>>> El jue., 13 dic. 2018 a las 11:13, Luisillo Contepomi
>>> (<[hidden email]>) escribió:
>>>> The last day work without problems was the last 10 december
>>>> I test all days. Last 3 days versions crash.
>>>> El jue., 13 dic. 2018 a las 10:55, Luisillo Contepomi
>>>> (<[hidden email]>) escribió:
>>>>> Thank you for answer Chris.
>>>>> Yes I have Net Framework 4.7.03062 installed.
>>>>> Steps to reproduce it:
>>>>> donwload the dev versión of today with git bash command $ git fetch
>>>>> --force --all
>>>>> runprebuild.bat
>>>>> compile.bat
>>>>> configure for grid with MySQL in a clean database, where you have all
>>>>> privileges, using example files from:
>>>>>
>>>>> /bin/Robust.ini.example
>>>>> /bin/OpenSim.ini.example
>>>>> /config-include/GridCommon.ini.example
>>>>> /config-include/FlotsamCache.ini.example
>>>>>
>>>>> Now run Robust.exe and then Opensim:exe
>>>>> Opensim crash with the error reported.
>>>>>
>>>>> Best regards,
>>>>> Luisillo
>>>>> El jue., 13 dic. 2018 a las 5:35, Chris (<[hidden email]>) escribió:
>>>>>> Hello, I can't reproduce this on my setup using the latest master.
>>>>>>
>>>>>> "Compiled in Win7 Framework64\v4.0.30319" <-- Are you using .NET 4.0?
>>>>>> The requirements for this was changed some months ago to require .NET
>>>>>> 4.6 or higher on master. If you haven't upgraded to v4.6 I would try
>>>>>> that and then compile again and see if it works. If you're already on
>>>>>> .NET v4.6 it could be a case of an out of date file and I would try a
>>>>>> fresh clone from master and copy the settings you need from your old
>>>>>> setup and see if that works.
>>>>>>
>>>>>> Hope this helps! :)
>>>>>>
>>>>>> On 12/12/2018 7:56 AM, Luisillo Contepomi wrote:
>>>>>>> Testing Grid with a region.
>>>>>>> Robust.exe start without problems but region can not start.
>>>>>>> Compiled in Win7 Framework64\v4.0.30319
>>>>>>> No documentation about Yengine in opensimulator.org except a Chat log
>>>>>>> with opinions but no information at all. I stop testing dev versions
>>>>>>> waiting to new information
>>>>>>>
>>>>>>> Regards,
>>>>>>> Luisillo
>>>>>>>
>>>>>>> ---Error in console----
>>>>>>> 2018-12-12 14:46:55,351 INFO  [XEngine]: Script stop strategy is co-op
>>>>>>> 2018-12-12 14:46:55,403 FATAL Fatal error:
>>>>>>> System.Reflection.TargetInvocationException: Exception has been thrown
>>>>>>> by the target of an invocation. --->
>>>>>>> System.TypeInitializationException: The type initializer for
>>>>>>> 'OpenSim.Region.ScriptEngine.Yengine.Yengine' threw an exception. --->
>>>>>>> System.IO.FileLoadException: Could not load file or assembly 'log4net,
>>>>>>> Version=2.0.8.0, Culture=neutral, PublicKeyToken=null' or one of its
>>>>>>> dependencies. The located assembly's manifest definition does not
>>>>>>> match the assembly reference. (Exception from HRESULT: 0x80131040)
>>>>>>>       at OpenSim.Region.ScriptEngine.Yengine.Yengine..cctor()
>>>>>>>       --- End of inner exception stack trace ---
>>>>>>>       at OpenSim.Region.ScriptEngine.Yengine.Yengine..ctor()
>>>>>>>       --- End of inner exception stack trace ---
>>>>>>>       at System.RuntimeTypeHandle.CreateInstance(RuntimeType type,
>>>>>>> Boolean publicOnly, Boolean noCheck, Boolean& canBeCached,
>>>>>>> RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
>>>>>>>       at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly,
>>>>>>> Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
>>>>>>>       at System.Activator.CreateInstance(Type type, Boolean nonPublic)
>>>>>>>       at System.Activator.CreateInstance(Type type)
>>>>>>>       at OpenSim.ApplicationPlugins.RegionModulesController.RegionModulesControllerPlugin.AddRegionToModules(Scene
>>>>>>> scene) in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\RegionModulesController\RegionModulesControllerPlugin.cs:line
>>>>>>> 395
>>>>>>>       at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
>>>>>>> portadd_flag, Boolean do_post_init, IScene& mscene) in
>>>>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
>>>>>>> 430
>>>>>>>       at OpenSim.OpenSimBase.CreateRegion(RegionInfo regionInfo, Boolean
>>>>>>> portadd_flag, IScene& scene) in
>>>>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
>>>>>>> 376
>>>>>>>       at OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostInitialise()
>>>>>>> in x:\0.9.0.1dev\opensimdev\opensim\OpenSim\ApplicationPlugins\LoadRegions\LoadRegionsPlugin.cs:line
>>>>>>> 130
>>>>>>>       at OpenSim.OpenSimBase.StartupSpecific() in
>>>>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSimBase.cs:line
>>>>>>> 285
>>>>>>>       at OpenSim.OpenSim.StartupSpecific() in
>>>>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Region\Application\OpenSim.cs:line
>>>>>>> 211
>>>>>>>       at OpenSim.Framework.Servers.BaseOpenSimServer.Startup() in
>>>>>>> x:\0.9.0.1dev\opensimdev\opensim\OpenSim\Framework\Servers\BaseOpenSimServer.cs:line
>>>>>>> 170
>>>>>>> _______________________________________________
>>>>>>> Opensim-users mailing list
>>>>>>> [hidden email]
>>>>>>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
>>>>>> --
>>>>>> OpenSim: 10 Region Standalone on 0.8.1 Dev
>>>>>> Physics: Open Dynamics Engine
>>>>>> OS: Windows 7 (x64)
>>>>>> CPU: AMD FX 8320 8-Core 3.5 GHz
>>>>>> Memory: 16 GB DDR3
>>>>>> Database: MySQL 5.1.63 (x64)
>>>>>>
>>>>>> _______________________________________________
>>>>>> Opensim-users mailing list
>>>>>> [hidden email]
>>>>>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
>>> _______________________________________________
>>> Opensim-users mailing list
>>> [hidden email]
>>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
>>
>> --
>> OpenSim: 10 Region Standalone on 0.8.1 Dev
>> Physics: Open Dynamics Engine
>> OS: Windows 7 (x64)
>> CPU: AMD FX 8320 8-Core 3.5 GHz
>> Memory: 16 GB DDR3
>> Database: MySQL 5.1.63 (x64)
>>
>> _______________________________________________
>> Opensim-users mailing list
>> [hidden email]
>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users


--
OpenSim: Grid Mode on OpenSim 0.9.1.0 Snail Dev
Physics: ubODE
OS: Windows 7 (x64) on .NET 4.7.2
CPU: AMD FX 8320 8-Core 3.5 GHz
Memory: 16 GB DDR3
Database: MySQL 5.5.8

_______________________________________________
Opensim-users mailing list
[hidden email]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region can not start by Yengine error in dev version from yesterday

Luisillo Contepomi
Thank you very much!
I do all new (master dev from git and database new) as all my tests.
Thank you very much again Chris and of course to all devs.
Luisillo


El vie., 14 dic. 2018 a las 23:41, Chris (<[hidden email]>) escribió:
>
> You're very welcome! If you would like to test on YEngine I would
> strongly recommend not doing that on your production server. If it
> happens to break your scripts you could have a hard time switching back
> over to XEngine as currently it seems to get really confused when you do
> that as explained in this mantis
> http://opensimulator.org/mantis/view.php?id=8407 . It would be better to
> test this on a database that you're not afraid to lose and start over
> from scratch on.
_______________________________________________
Opensim-users mailing list
[hidden email]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users