Region not part of an estate

classic Classic list List threaded Threaded
17 messages Options
Reply | Threaded
Open this post in threaded view
|

Region not part of an estate

lppallew
Hello Everyone,
 
I recently fired up opensim again after being shutdown for a move to another state. The problem I'm having is that each time I try to create a new region or load the regions from my regions.ini file, opensim crashes with the message: "Region .... is not part of an estate."
 
How can I reset this process or get my set-up back in sync?
 
I've tried deleting MySql DB's and recreating but somewhere it is holding on to an existing estate and never gives me the option to create a new estate.
 
Thanks for the help.
 
Wayne

_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region not part of an estate

core
This is completely from somewhere in the back of my mind, but I recall having a similar problem and I believe emptying the 'assetcache' folder and perhaps the 'DataSnapshot' one as well solved the problem.  Some cache somewhere was holding information that was confusing OpenSim in some way.  My apologies for the non-scientific explanation, but I hope this helps.

- Core/Jason

On 11/15/2011 7:34 AM, Wayne wrote:
Hello Everyone,
 
I recently fired up opensim again after being shutdown for a move to another state. The problem I'm having is that each time I try to create a new region or load the regions from my regions.ini file, opensim crashes with the message: "Region .... is not part of an estate."
 
How can I reset this process or get my set-up back in sync?
 
I've tried deleting MySql DB's and recreating but somewhere it is holding on to an existing estate and never gives me the option to create a new estate.
 
Thanks for the help.
 
Wayne
_______________________________________________ Opensim-users mailing list [hidden email] https://lists.berlios.de/mailman/listinfo/opensim-users


-- 
meatspace: jason
cyberspace: mimetic.core
chicago, il us
[hidden email]
twitter: @odosys


_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Template string for RemoteAdmin control

Ovi Chris Rouly
Folks,
 
What follows may be of no use to anyone.  But, this week I needed it and couldn't find one like it (or anything even close to it).  What it is is a simple example of the input required by OpenSim 0.7.2 through its [Remote Admin] control port in order to control, for example, the "create a new user" function.
 
Shown below is a plain text string that OpenSim 0.7.2 will accept through the remoteAdmin control port.  Some of you may know and understand the implications of using an XML-based remote procedure calling (RPC) service to control an external application via a few key control tokens, an available network connection, and the former's transmission through that connection.  Others may not.  So, to be brief, I'll just say that the remoteAdmin port provides such a functionality.  And, in order to take advantage of OpenSim's remote admin facility, I "knitted" together some C# source that produced the remoteAdmin control port's required HTTP/1.0 protocol stream with its embedded data tokens.  The example that follows is that plain text control/data stream output.  I have found that this string will cause OpenSim to "create a new user" on my box with its StandAlone 0.7.2 instance.
 
Maybe I'm wrong, but since I had to work fairly hard to gain this "template string" (and its implications for all the other remoteAdmin functions), I thought maybe it might have value for someone else in the group.  Thus, may I offer to toss it out to the OpenSim Users Group.  The web site (see the reference below) has other more language-specific, abstract, yet "vital" resources.  In particular, the C# methods were *INVALUABLE* as were Justin's helpful words.
 
Respectfully,
 
Chris
 
 
>>>>>>EXAMPLE FOLLOWS<<<<<<<
 
POST admin_create_user HTTP/1.0
Host: http://10.0.0.12:16384/
Content-type: text/xml
Content-Length: 993
 
<?xml version="1.0"?>
<methodCall>
        <methodName>admin_create_user</methodName>
                <params>
                        <param>
                                <value>
                                        <struct>
                                                <member>
                                                        <name>password</name>
                                                        <value><string>password</string></value>
                                                </member>
                                                <member>
                                                        <name>user_firstname</name>
                                                        <value><string>male</string></value>
                                                </member>
                                                <member>
                                                        <name>user_lastname</name>
                                                        <value><string>9999</string></value>
                                                </member>
                                                <member>
                                                        <name>user_password</name>
                                                        <value><string>password</string></value>
                                                </member>
                                                <member>
                                                        <name>user_email</name>
                                                        <value><string>[hidden email]</string></value>
                                                </member>
                                                <member>
                                                        <name>start_region_x</name>
                                                        <value><int>128</int></value>
                                                </member>
                                                <member>
                                                        <name>start_region_y</name>
                                                        <value><int>128</int></value>
                                                </member>
                                        </struct>
                                </value>
                        </param>
                </params>
</methodCall>
 
 

_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region not part of an estate

lppallew
In reply to this post by core
Thanks Jason, but that didn't do it.  Somehow I need opensim to reset so it asks me to create an estate again.
 
I've deleted everything and even downloaded a new git version, and still it's hanging on to the estate from a previous install.
 
This is going against osgrid, btw.  Do you think it's reading a config from there?

On Tue, Nov 15, 2011 at 10:31 AM, core <[hidden email]> wrote:
This is completely from somewhere in the back of my mind, but I recall having a similar problem and I believe emptying the 'assetcache' folder and perhaps the 'DataSnapshot' one as well solved the problem.  Some cache somewhere was holding information that was confusing OpenSim in some way.  My apologies for the non-scientific explanation, but I hope this helps.

- Core/Jason


On 11/15/2011 7:34 AM, Wayne wrote:
Hello Everyone,
 
I recently fired up opensim again after being shutdown for a move to another state. The problem I'm having is that each time I try to create a new region or load the regions from my regions.ini file, opensim crashes with the message: "Region .... is not part of an estate."
 
How can I reset this process or get my set-up back in sync?
 
I've tried deleting MySql DB's and recreating but somewhere it is holding on to an existing estate and never gives me the option to create a new estate.
 
Thanks for the help.
 
Wayne
_______________________________________________ Opensim-users mailing list [hidden email] https://lists.berlios.de/mailman/listinfo/opensim-users


-- 
meatspace: jason
cyberspace: mimetic.core
chicago, il us
[hidden email]
twitter: @odosys


_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users



_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region not part of an estate

Fleep Tuque
Hi Wayne,

I think I remember having this problem before and the issue was that I hadn't completely removed the MySQL data.  If you're on Windows, just uninstalling doesn't remove all the tables, you have to also delete the data files to start from scratch.

I believe once I got back to a clean starting point, then I was able to re-assign the estates..

Good luck!

- Chris/Fleep


Chris M. Collins (SL: Fleep Tuque)
Project Manager, UC Second Life 
UCit Instructional & Research Computing
University of Cincinnati 
406E Zimmer Hall
PO Box 210088
Cincinnati, OH 45221-0088
(513)556-3018

http://www.uc.edu/ucit/learningtools/secondlife.html

On Tue, Nov 15, 2011 at 12:22 PM, Wayne <[hidden email]> wrote:
Thanks Jason, but that didn't do it.  Somehow I need opensim to reset so it asks me to create an estate again.
 
I've deleted everything and even downloaded a new git version, and still it's hanging on to the estate from a previous install.
 
This is going against osgrid, btw.  Do you think it's reading a config from there?

On Tue, Nov 15, 2011 at 10:31 AM, core <[hidden email]> wrote:
This is completely from somewhere in the back of my mind, but I recall having a similar problem and I believe emptying the 'assetcache' folder and perhaps the 'DataSnapshot' one as well solved the problem.  Some cache somewhere was holding information that was confusing OpenSim in some way.  My apologies for the non-scientific explanation, but I hope this helps.

- Core/Jason


On 11/15/2011 7:34 AM, Wayne wrote:
Hello Everyone,
 
I recently fired up opensim again after being shutdown for a move to another state. The problem I'm having is that each time I try to create a new region or load the regions from my regions.ini file, opensim crashes with the message: "Region .... is not part of an estate."
 
How can I reset this process or get my set-up back in sync?
 
I've tried deleting MySql DB's and recreating but somewhere it is holding on to an existing estate and never gives me the option to create a new estate.
 
Thanks for the help.
 
Wayne
_______________________________________________ Opensim-users mailing list [hidden email] https://lists.berlios.de/mailman/listinfo/opensim-users


-- 
meatspace: jason
cyberspace: mimetic.core
chicago, il us
[hidden email]
twitter: @odosys


_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users



_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users



_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Template string for RemoteAdmin control

R. Gunther
In reply to this post by Ovi Chris Rouly
You dont mean this site ? http://opensimulator.org/wiki/RemoteAdmin
Problem is there a remote admin and some remote console stuff (last one i dont know how to use)
i wish remoteadmin did have more commands, its easy to use. and still secure if it keeps local

On 2011-11-15 16:58, Ovi Chris Rouly wrote:
Folks,
 
What follows may be of no use to anyone.  But, this week I needed it and couldn't find one like it (or anything even close to it).  What it is is a simple example of the input required by OpenSim 0.7.2 through its [Remote Admin] control port in order to control, for example, the "create a new user" function.
 
Shown below is a plain text string that OpenSim 0.7.2 will accept through the remoteAdmin control port.  Some of you may know and understand the implications of using an XML-based remote procedure calling (RPC) service to control an external application via a few key control tokens, an available network connection, and the former's transmission through that connection.  Others may not.  So, to be brief, I'll just say that the remoteAdmin port provides such a functionality.  And, in order to take advantage of OpenSim's remote admin facility, I "knitted" together some C# source that produced the remoteAdmin control port's required HTTP/1.0 protocol stream with its embedded data tokens.  The example that follows is that plain text control/data stream output.  I have found that this string will cause OpenSim to "create a new user" on my box with its StandAlone 0.7.2 instance.
 
Maybe I'm wrong, but since I had to work fairly hard to gain this "template string" (and its implications for all the other remoteAdmin functions), I thought maybe it might have value for someone else in the group.  Thus, may I offer to toss it out to the OpenSim Users Group.  The web site (see the reference below) has other more language-specific, abstract, yet "vital" resources.  In particular, the C# methods were *INVALUABLE* as were Justin's helpful words.
 
Respectfully,
 
Chris
 
 
>>>>>>EXAMPLE FOLLOWS<<<<<<<
 
POST admin_create_user HTTP/1.0
Host: http://10.0.0.12:16384/
Content-type: text/xml
Content-Length: 993
 
<?xml version="1.0"?>
<methodCall>
        <methodName>admin_create_user</methodName>
                <params>
                        <param>
                                <value>
                                        <struct>
                                                <member>
                                                        <name>password</name>
                                                        <value><string>password</string></value>
                                                </member>
                                                <member>
                                                        <name>user_firstname</name>
                                                        <value><string>male</string></value>
                                                </member>
                                                <member>
                                                        <name>user_lastname</name>
                                                        <value><string>9999</string></value>
                                                </member>
                                                <member>
                                                        <name>user_password</name>
                                                        <value><string>password</string></value>
                                                </member>
                                                <member>
                                                        <name>user_email</name>
                                                        <value><string>[hidden email]</string></value>
                                                </member>
                                                <member>
                                                        <name>start_region_x</name>
                                                        <value><int>128</int></value>
                                                </member>
                                                <member>
                                                        <name>start_region_y</name>
                                                        <value><int>128</int></value>
                                                </member>
                                        </struct>
                                </value>
                        </param>
                </params>
</methodCall>
 
 


_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users


_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region not part of an estate

Gwyneth Llewelyn
In reply to this post by lppallew
Dear Wayne,

I get this error when launching a home-based region to connect with a server-based grid. The home-based region is connecting to an external MySQL database, and I get this error sometimes.

Why? Apparently what happens is that DynDNS is sometimes slow in updating the IP address for my home connection. When that happens, the MySQL database, which is configured to accept connections from a very limited number of hosts, will reject the connection. I get this "Region XXX is not part of an estate" when that happens: the regions.ini file gets launched, but the first connection call to MySQL is to check if that region is part of an Estate, and when that request fails, OpenSim crashes.

I'm not sure if that's the same problem you have, but it could jusy be related to that: your OpenSim is not being able to connect to the database. Check the login, the password, the database name, and if your IP address is allowed to connect to MySQL (even if everything is run locally on your machine, it still requires permission to connect to "localhost").

- Gwyn

On 2011/11/15, at 13:34, Wayne wrote:

Hello Everyone,
 
I recently fired up opensim again after being shutdown for a move to another state. The problem I'm having is that each time I try to create a new region or load the regions from my regions.ini file, opensim crashes with the message: "Region .... is not part of an estate."
 
How can I reset this process or get my set-up back in sync?
 
I've tried deleting MySql DB's and recreating but somewhere it is holding on to an existing estate and never gives me the option to create a new estate.
 
Thanks for the help.
 
Wayne
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users

--

"I'm not building a game. I'm building a new country."

  -- Philip "Linden" Rosedale, interview to Wired, 2004-05-08




_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
--
"I'm not building a game. I'm building a new country."
  -- Philip "Linden" Rosedale, interview to Wired, 2004-05-08
Reply | Threaded
Open this post in threaded view
|

Re: Region not part of an estate

lppallew
Thank you Fleep and Gwyn for your time in helping me out.
 
To date, I've tried everything short of reformatting the hard drive - nothing seems to work. When I start the simulator, it totally skips the message to create an estate. Then, if I try to create a region, it crashes saying that the region does not belong to an estate. A very frustrating "catch 22" experience.
 
If I get a solution, I will be sure to post for others who may run into this in the future.
 
Wayne
 
 


 
On Wed, Nov 16, 2011 at 7:04 AM, Gwyneth Llewelyn <[hidden email]> wrote:
Dear Wayne,

I get this error when launching a home-based region to connect with a server-based grid. The home-based region is connecting to an external MySQL database, and I get this error sometimes.

Why? Apparently what happens is that DynDNS is sometimes slow in updating the IP address for my home connection. When that happens, the MySQL database, which is configured to accept connections from a very limited number of hosts, will reject the connection. I get this "Region XXX is not part of an estate" when that happens: the regions.ini file gets launched, but the first connection call to MySQL is to check if that region is part of an Estate, and when that request fails, OpenSim crashes.

I'm not sure if that's the same problem you have, but it could jusy be related to that: your OpenSim is not being able to connect to the database. Check the login, the password, the database name, and if your IP address is allowed to connect to MySQL (even if everything is run locally on your machine, it still requires permission to connect to "localhost").

- Gwyn

On 2011/11/15, at 13:34, Wayne wrote:

Hello Everyone,
 
I recently fired up opensim again after being shutdown for a move to another state. The problem I'm having is that each time I try to create a new region or load the regions from my regions.ini file, opensim crashes with the message: "Region .... is not part of an estate."
 
How can I reset this process or get my set-up back in sync?
 
I've tried deleting MySql DB's and recreating but somewhere it is holding on to an existing estate and never gives me the option to create a new estate.
 
Thanks for the help.
 
Wayne
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users

--

"I'm not building a game. I'm building a new country."

  -- Philip "Linden" Rosedale, interview to Wired, 2004-05-08




_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users



_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region not part of an estate

M.E. Verhagen
Maybe there's an issue with the database.

There a few tables in the database wich are related to the estates and the regions,
estate_settings, regions and these are glued together in the estate_map table.

What you should check if the regions and the estates are glued together oki, all the regionid's should match estateid's.  Change the estateid's ...

_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region not part of an estate

justincc
In reply to this post by lppallew
At this stage it starts to sound more like a config issue than anything else.

Are you using an old config or adapting one from the release?  If you are using an old config I recommend you try
starting from fresh .example files - reusing old configs is known to cause problems in some situations.

On 16/11/11 19:29, Wayne wrote:

> Thank you Fleep and Gwyn for your time in helping me out.
> To date, I've tried everything short of reformatting the hard drive - nothing seems to work. When I start the simulator,
> it totally skips the message to create an estate. Then, if I try to create a region, it crashes saying that the region
> does not belong to an estate. A very frustrating "catch 22" experience.
> If I get a solution, I will be sure to post for others who may run into this in the future.
> Wayne
>
>
> On Wed, Nov 16, 2011 at 7:04 AM, Gwyneth Llewelyn <[hidden email]
> <mailto:[hidden email]>> wrote:
>
>     Dear Wayne,
>
>     I get this error when launching a home-based region to connect with a server-based grid. The home-based region is
>     connecting to an external MySQL database, and I get this error sometimes.
>
>     Why? Apparently what happens is that DynDNS is sometimes slow in updating the IP address for my home connection.
>     When that happens, the MySQL database, which is configured to accept connections from a very limited number of
>     hosts, will reject the connection. I get this "Region XXX is not part of an estate" when that happens: the
>     regions.ini file gets launched, but the first connection call to MySQL is to check if that region is part of an
>     Estate, and when that request fails, OpenSim crashes.
>
>     I'm not sure if that's the same problem you have, but it could jusy be related to that: your OpenSim is not being
>     able to connect to the database. Check the login, the password, the database name, and if your IP address is allowed
>     to connect to MySQL (even if everything is run locally on your machine, it still requires permission to connect to
>     "localhost").
>
>     - Gwyn
>
>     On 2011/11/15, at 13:34, Wayne wrote:
>
>>     Hello Everyone,
>>     I recently fired up opensim again after being shutdown for a move to another state. The problem I'm having is that
>>     each time I try to create a new region or load the regions from my regions.ini file, opensim crashes with the
>>     message: "Region .... is not part of an estate."
>>     How can I reset this process or get my set-up back in sync?
>>     I've tried deleting MySql DB's and recreating but somewhere it is holding on to an existing estate and never gives
>>     me the option to create a new estate.
>>     Thanks for the help.
>>     Wayne
>>     _______________________________________________
>>     Opensim-users mailing list
>>     [hidden email] <mailto:[hidden email]>
>>     https://lists.berlios.de/mailman/listinfo/opensim-users
>
>     --
>
>     "I'm not building a game. I'm building a new country."
>
>     -- Philip "Linden" Rosedale, interview to Wired, 2004-05-08
>
>
>
>
>     _______________________________________________
>     Opensim-users mailing list
>     [hidden email] <mailto:[hidden email]>
>     https://lists.berlios.de/mailman/listinfo/opensim-users
>
>
>
>
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> https://lists.berlios.de/mailman/listinfo/opensim-users


--
Justin Clark-Casey (justincc)
http://justincc.org/blog
http://twitter.com/justincc
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Template string for RemoteAdmin control

justincc
In reply to this post by Ovi Chris Rouly
It would be great if you could add this information to [1], Chris, so the next poor soul has a shoulder to stand on :)

[1] http://opensimulator.org/wiki/RemoteAdmin

On 15/11/11 15:58, Ovi Chris Rouly wrote:

> Folks,
> What follows may be of no use to anyone. But, this week I needed it and couldn't find one like it (or anything even
> close to it). What it is is a simple example of the input required by OpenSim 0.7.2 through its [Remote Admin] control
> port in order to control, for example, the "create a new user" function.
> Shown below is a plain text string that OpenSim 0.7.2 will accept through the remoteAdmin control port. Some of you may
> know and understand the implications of using an XML-based remote procedure calling (RPC) service to control an external
> application via a few key control tokens, an available network connection, and the former's transmission through that
> connection. Others may not. So, to be brief, I'll just say that the remoteAdmin port provides such a functionality. And,
> in order to take advantage of OpenSim's remote admin facility, I "knitted" together some C# source that produced the
> remoteAdmin control port's required HTTP/1.0 protocol stream with its embedded data tokens. The example that follows is
> that plain text control/data stream output. I have found that this string will cause OpenSim to "create a new user" on
> my box with its StandAlone 0.7.2 instance.
> Maybe I'm wrong, but since I had to work fairly hard to gain this "template string" (and its implications for all the
> other remoteAdmin functions), I thought maybe it might have value for someone else in the group. Thus, may I offer to
> toss it out to the OpenSim Users Group. The web site (see the reference below) has other more language-specific,
> abstract, yet "vital" resources. In particular, the C# methods were *INVALUABLE* as were Justin's helpful words.
> Respectfully,
> Chris
> ref: http://opensimulator.org/wiki/RemoteAdmin
>  >>>>>>EXAMPLE FOLLOWS<<<<<<<
>
> POST admin_create_user HTTP/1.0
> Host: http://10.0.0.12:16384/
> Content-type: text/xml
> Content-Length: 993
>
> <?xml version="1.0"?>
> <methodCall>
> <methodName>admin_create_user</methodName>
> <params>
> <param>
> <value>
> <struct>
> <member>
> <name>password</name>
> <value><string>password</string></value>
> </member>
> <member>
> <name>user_firstname</name>
> <value><string>male</string></value>
> </member>
> <member>
> <name>user_lastname</name>
> <value><string>9999</string></value>
> </member>
> <member>
> <name>user_password</name>
> <value><string>password</string></value>
> </member>
> <member>
> <name>user_email</name>
> <value><string>[hidden email]</string></value>
> </member>
> <member>
> <name>start_region_x</name>
> <value><int>128</int></value>
> </member>
> <member>
> <name>start_region_y</name>
> <value><int>128</int></value>
> </member>
> </struct>
> </value>
> </param>
> </params>
> </methodCall>
>
>
>
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> https://lists.berlios.de/mailman/listinfo/opensim-users


--
Justin Clark-Casey (justincc)
http://justincc.org/blog
http://twitter.com/justincc
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region not part of an estate

lppallew
In reply to this post by justincc
OK.  Finally got opensim to ask the question: "Would you like to create a new Estate".
 
I uninstalled MySql, deleted the MYSql folder and all db files then reinstalled. Then I realized I was skipping a step - I was never granting permissions to [hidden email]. After doing that, the server loaded. (but soon crashed)
 
Now the new problem:
 
opensim server starts, loads regions and everything looks fine until 5 seconds later when the following appears and opensim crashes:
 
2011-11-19 21:11:56,557 ERROR - OpenSim.Application [APPLICATION]:
APPLICATION EXCEPTION DETECTED: System.UnhandledExceptionEventArgs
Exception: System.UriFormatException: Invalid URI: The hostname could not be parsed.
Server stack trace:
   at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)
   at System.Uri..ctor(String uriString)
   at System.Net.WebRequest.Create(String requestUriString)
   at OpenSim.Services.Connectors.NeighbourServicesConnector.DoHelloNeighbourCall(GridRegion region, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Services\Connectors\Neighbour\NeighbourServiceConnector.cs:line 92
   at OpenSim.Services.Connectors.NeighbourServicesConnector.HelloNeighbour(UInt64 regionHandle, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Services\Connectors\Neighbour\NeighbourServiceConnector.cs:line 78
   at OpenSim.Region.CoreModules.ServiceConnectorsOut.Neighbour.RemoteNeighbourServicesConnector.HelloNeighbour(UInt64 regionHandle, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\CoreModules\ServiceConnectorsOut\Neighbour\RemoteNeighourServiceConnector.cs:line 150
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighboursThatRegionIsUpAsync(INeighbourService neighbourService, RegionInfo region, UInt64 regionhandle) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\Framework\Scenes\SceneCommunicationService.cs:line 161
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
   at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighbourThatRegionUpDelegate.EndInvoke(IAsyncResult result)
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighborsThatRegionisUpCompleted(IAsyncResult iar) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\Framework\Scenes\SceneCommunicationService.cs:line 146
   at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
   at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.DoAsyncCall()
   at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
   at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
Application is terminating: True
 
Any ideas?
 
Thanks,
Wayne
 


 
On Wed, Nov 16, 2011 at 5:50 PM, Justin Clark-Casey <[hidden email]> wrote:
At this stage it starts to sound more like a config issue than anything else.

Are you using an old config or adapting one from the release?  If you are using an old config I recommend you try starting from fresh .example files - reusing old configs is known to cause problems in some situations.


On 16/11/11 19:29, Wayne wrote:
Thank you Fleep and Gwyn for your time in helping me out.
To date, I've tried everything short of reformatting the hard drive - nothing seems to work. When I start the simulator,
it totally skips the message to create an estate. Then, if I try to create a region, it crashes saying that the region
does not belong to an estate. A very frustrating "catch 22" experience.
If I get a solution, I will be sure to post for others who may run into this in the future.
Wayne


On Wed, Nov 16, 2011 at 7:04 AM, Gwyneth Llewelyn <[hidden email]
<mailto:[hidden email]>> wrote:

   Dear Wayne,

   I get this error when launching a home-based region to connect with a server-based grid. The home-based region is
   connecting to an external MySQL database, and I get this error sometimes.

   Why? Apparently what happens is that DynDNS is sometimes slow in updating the IP address for my home connection.
   When that happens, the MySQL database, which is configured to accept connections from a very limited number of
   hosts, will reject the connection. I get this "Region XXX is not part of an estate" when that happens: the
   regions.ini file gets launched, but the first connection call to MySQL is to check if that region is part of an
   Estate, and when that request fails, OpenSim crashes.

   I'm not sure if that's the same problem you have, but it could jusy be related to that: your OpenSim is not being
   able to connect to the database. Check the login, the password, the database name, and if your IP address is allowed
   to connect to MySQL (even if everything is run locally on your machine, it still requires permission to connect to
   "localhost").

   - Gwyn

   On 2011/11/15, at 13:34, Wayne wrote:

   Hello Everyone,
   I recently fired up opensim again after being shutdown for a move to another state. The problem I'm having is that
   each time I try to create a new region or load the regions from my regions.ini file, opensim crashes with the
   message: "Region .... is not part of an estate."
   How can I reset this process or get my set-up back in sync?
   I've tried deleting MySql DB's and recreating but somewhere it is holding on to an existing estate and never gives
   me the option to create a new estate.
   Thanks for the help.
   Wayne
   _______________________________________________
   Opensim-users mailing list
   [hidden email] <mailto:[hidden email]>
   https://lists.berlios.de/mailman/listinfo/opensim-users

   --

   "I'm not building a game. I'm building a new country."

   -- Philip "Linden" Rosedale, interview to Wired, 2004-05-08




   _______________________________________________
   Opensim-users mailing list
   [hidden email] <mailto:[hidden email]>
   https://lists.berlios.de/mailman/listinfo/opensim-users





_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users


--
Justin Clark-Casey (justincc)
http://justincc.org/blog
http://twitter.com/justincc

_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users


_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region not part of an estate

Fleep Tuque
Hi Wayne,

Not sure if you typed that backwards in your email but did it correctly when you were creating the database, but assuming your database name and database username are both opensim, then it should be:

grant all on opensim.* to 'opensim'@'localhost';

Not localhost@opensim...

Not sure if that's related to the error you posted but thought I'd mention just in case..

- Chris/Fleep

On Sun, Nov 20, 2011 at 9:42 AM, Wayne <[hidden email]> wrote:
OK.  Finally got opensim to ask the question: "Would you like to create a new Estate".
 
I uninstalled MySql, deleted the MYSql folder and all db files then reinstalled. Then I realized I was skipping a step - I was never granting permissions to [hidden email]. After doing that, the server loaded. (but soon crashed)
 
Now the new problem:
 
opensim server starts, loads regions and everything looks fine until 5 seconds later when the following appears and opensim crashes:
 
2011-11-19 21:11:56,557 ERROR - OpenSim.Application [APPLICATION]:
APPLICATION EXCEPTION DETECTED: System.UnhandledExceptionEventArgs
Exception: System.UriFormatException: Invalid URI: The hostname could not be parsed.
Server stack trace:
   at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)
   at System.Uri..ctor(String uriString)
   at System.Net.WebRequest.Create(String requestUriString)
   at OpenSim.Services.Connectors.NeighbourServicesConnector.DoHelloNeighbourCall(GridRegion region, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Services\Connectors\Neighbour\NeighbourServiceConnector.cs:line 92
   at OpenSim.Services.Connectors.NeighbourServicesConnector.HelloNeighbour(UInt64 regionHandle, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Services\Connectors\Neighbour\NeighbourServiceConnector.cs:line 78
   at OpenSim.Region.CoreModules.ServiceConnectorsOut.Neighbour.RemoteNeighbourServicesConnector.HelloNeighbour(UInt64 regionHandle, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\CoreModules\ServiceConnectorsOut\Neighbour\RemoteNeighourServiceConnector.cs:line 150
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighboursThatRegionIsUpAsync(INeighbourService neighbourService, RegionInfo region, UInt64 regionhandle) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\Framework\Scenes\SceneCommunicationService.cs:line 161
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
   at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighbourThatRegionUpDelegate.EndInvoke(IAsyncResult result)
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighborsThatRegionisUpCompleted(IAsyncResult iar) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\Framework\Scenes\SceneCommunicationService.cs:line 146
   at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
   at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.DoAsyncCall()
   at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
   at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
Application is terminating: True
 
Any ideas?
 
Thanks,
Wayne
 


 
On Wed, Nov 16, 2011 at 5:50 PM, Justin Clark-Casey <[hidden email]> wrote:
At this stage it starts to sound more like a config issue than anything else.

Are you using an old config or adapting one from the release?  If you are using an old config I recommend you try starting from fresh .example files - reusing old configs is known to cause problems in some situations.


On 16/11/11 19:29, Wayne wrote:
Thank you Fleep and Gwyn for your time in helping me out.
To date, I've tried everything short of reformatting the hard drive - nothing seems to work. When I start the simulator,
it totally skips the message to create an estate. Then, if I try to create a region, it crashes saying that the region
does not belong to an estate. A very frustrating "catch 22" experience.
If I get a solution, I will be sure to post for others who may run into this in the future.
Wayne


On Wed, Nov 16, 2011 at 7:04 AM, Gwyneth Llewelyn <[hidden email]
<mailto:[hidden email]>> wrote:

   Dear Wayne,

   I get this error when launching a home-based region to connect with a server-based grid. The home-based region is
   connecting to an external MySQL database, and I get this error sometimes.

   Why? Apparently what happens is that DynDNS is sometimes slow in updating the IP address for my home connection.
   When that happens, the MySQL database, which is configured to accept connections from a very limited number of
   hosts, will reject the connection. I get this "Region XXX is not part of an estate" when that happens: the
   regions.ini file gets launched, but the first connection call to MySQL is to check if that region is part of an
   Estate, and when that request fails, OpenSim crashes.

   I'm not sure if that's the same problem you have, but it could jusy be related to that: your OpenSim is not being
   able to connect to the database. Check the login, the password, the database name, and if your IP address is allowed
   to connect to MySQL (even if everything is run locally on your machine, it still requires permission to connect to
   "localhost").

   - Gwyn

   On 2011/11/15, at 13:34, Wayne wrote:

   Hello Everyone,
   I recently fired up opensim again after being shutdown for a move to another state. The problem I'm having is that
   each time I try to create a new region or load the regions from my regions.ini file, opensim crashes with the
   message: "Region .... is not part of an estate."
   How can I reset this process or get my set-up back in sync?
   I've tried deleting MySql DB's and recreating but somewhere it is holding on to an existing estate and never gives
   me the option to create a new estate.
   Thanks for the help.
   Wayne
   _______________________________________________
   Opensim-users mailing list
   [hidden email] <mailto:[hidden email]>
   https://lists.berlios.de/mailman/listinfo/opensim-users

   --

   "I'm not building a game. I'm building a new country."

   -- Philip "Linden" Rosedale, interview to Wired, 2004-05-08




   _______________________________________________
   Opensim-users mailing list
   [hidden email] <mailto:[hidden email]>
   https://lists.berlios.de/mailman/listinfo/opensim-users





_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users


--
Justin Clark-Casey (justincc)
http://justincc.org/blog
http://twitter.com/justincc

_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users


_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users



_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region not part of an estate

lppallew
Hi Fleep,
 
I typed it backwards in the email.
 
Thanks

On Sun, Nov 20, 2011 at 10:16 AM, Fleep Tuque <[hidden email]> wrote:
Hi Wayne,

Not sure if you typed that backwards in your email but did it correctly when you were creating the database, but assuming your database name and database username are both opensim, then it should be:

grant all on opensim.* to 'opensim'@'localhost';

Not localhost@opensim...

Not sure if that's related to the error you posted but thought I'd mention just in case..

- Chris/Fleep


On Sun, Nov 20, 2011 at 9:42 AM, Wayne <[hidden email]> wrote:
OK.  Finally got opensim to ask the question: "Would you like to create a new Estate".
 
I uninstalled MySql, deleted the MYSql folder and all db files then reinstalled. Then I realized I was skipping a step - I was never granting permissions to [hidden email]. After doing that, the server loaded. (but soon crashed)
 
Now the new problem:
 
opensim server starts, loads regions and everything looks fine until 5 seconds later when the following appears and opensim crashes:
 
2011-11-19 21:11:56,557 ERROR - OpenSim.Application [APPLICATION]:
APPLICATION EXCEPTION DETECTED: System.UnhandledExceptionEventArgs
Exception: System.UriFormatException: Invalid URI: The hostname could not be parsed.
Server stack trace:
   at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)
   at System.Uri..ctor(String uriString)
   at System.Net.WebRequest.Create(String requestUriString)
   at OpenSim.Services.Connectors.NeighbourServicesConnector.DoHelloNeighbourCall(GridRegion region, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Services\Connectors\Neighbour\NeighbourServiceConnector.cs:line 92
   at OpenSim.Services.Connectors.NeighbourServicesConnector.HelloNeighbour(UInt64 regionHandle, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Services\Connectors\Neighbour\NeighbourServiceConnector.cs:line 78
   at OpenSim.Region.CoreModules.ServiceConnectorsOut.Neighbour.RemoteNeighbourServicesConnector.HelloNeighbour(UInt64 regionHandle, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\CoreModules\ServiceConnectorsOut\Neighbour\RemoteNeighourServiceConnector.cs:line 150
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighboursThatRegionIsUpAsync(INeighbourService neighbourService, RegionInfo region, UInt64 regionhandle) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\Framework\Scenes\SceneCommunicationService.cs:line 161
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
   at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighbourThatRegionUpDelegate.EndInvoke(IAsyncResult result)
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighborsThatRegionisUpCompleted(IAsyncResult iar) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\Framework\Scenes\SceneCommunicationService.cs:line 146
   at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
   at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.DoAsyncCall()
   at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
   at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
Application is terminating: True
 
Any ideas?
 
Thanks,
Wayne
 


 
On Wed, Nov 16, 2011 at 5:50 PM, Justin Clark-Casey <[hidden email]> wrote:
At this stage it starts to sound more like a config issue than anything else.

Are you using an old config or adapting one from the release?  If you are using an old config I recommend you try starting from fresh .example files - reusing old configs is known to cause problems in some situations.


On 16/11/11 19:29, Wayne wrote:
Thank you Fleep and Gwyn for your time in helping me out.
To date, I've tried everything short of reformatting the hard drive - nothing seems to work. When I start the simulator,
it totally skips the message to create an estate. Then, if I try to create a region, it crashes saying that the region
does not belong to an estate. A very frustrating "catch 22" experience.
If I get a solution, I will be sure to post for others who may run into this in the future.
Wayne


On Wed, Nov 16, 2011 at 7:04 AM, Gwyneth Llewelyn <[hidden email]
<mailto:[hidden email]>> wrote:

   Dear Wayne,

   I get this error when launching a home-based region to connect with a server-based grid. The home-based region is
   connecting to an external MySQL database, and I get this error sometimes.

   Why? Apparently what happens is that DynDNS is sometimes slow in updating the IP address for my home connection.
   When that happens, the MySQL database, which is configured to accept connections from a very limited number of
   hosts, will reject the connection. I get this "Region XXX is not part of an estate" when that happens: the
   regions.ini file gets launched, but the first connection call to MySQL is to check if that region is part of an
   Estate, and when that request fails, OpenSim crashes.

   I'm not sure if that's the same problem you have, but it could jusy be related to that: your OpenSim is not being
   able to connect to the database. Check the login, the password, the database name, and if your IP address is allowed
   to connect to MySQL (even if everything is run locally on your machine, it still requires permission to connect to
   "localhost").

   - Gwyn

   On 2011/11/15, at 13:34, Wayne wrote:

   Hello Everyone,
   I recently fired up opensim again after being shutdown for a move to another state. The problem I'm having is that
   each time I try to create a new region or load the regions from my regions.ini file, opensim crashes with the
   message: "Region .... is not part of an estate."
   How can I reset this process or get my set-up back in sync?
   I've tried deleting MySql DB's and recreating but somewhere it is holding on to an existing estate and never gives
   me the option to create a new estate.
   Thanks for the help.
   Wayne
   _______________________________________________
   Opensim-users mailing list
   [hidden email] <mailto:[hidden email]>
   https://lists.berlios.de/mailman/listinfo/opensim-users

   --

   "I'm not building a game. I'm building a new country."

   -- Philip "Linden" Rosedale, interview to Wired, 2004-05-08




   _______________________________________________
   Opensim-users mailing list
   [hidden email] <mailto:[hidden email]>
   https://lists.berlios.de/mailman/listinfo/opensim-users





_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users


--
Justin Clark-Casey (justincc)
http://justincc.org/blog
http://twitter.com/justincc

_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users


_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users



_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users



_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region not part of an estate

Fleep Tuque
Nod, I thought that was probably the case, but you never know!  :)

In terms of the error you posted, maybe someone with better understanding can reply with more info, but it seems like the relevant part is:  Invalid URI: The hostname could not be parsed.

Maybe double check your configuration files and make sure that you don't have any typos in the URL format anywhere?  What does your region.ini file look like for internal and external hostnames?
 
That's probably where I'd start looking...

Good luck and keep us posted!

- Chris/Fleep



On Sun, Nov 20, 2011 at 10:25 AM, Wayne <[hidden email]> wrote:
Hi Fleep,
 
I typed it backwards in the email.
 
Thanks

On Sun, Nov 20, 2011 at 10:16 AM, Fleep Tuque <[hidden email]> wrote:
Hi Wayne,

Not sure if you typed that backwards in your email but did it correctly when you were creating the database, but assuming your database name and database username are both opensim, then it should be:

grant all on opensim.* to 'opensim'@'localhost';

Not localhost@opensim...

Not sure if that's related to the error you posted but thought I'd mention just in case..

- Chris/Fleep


On Sun, Nov 20, 2011 at 9:42 AM, Wayne <[hidden email]> wrote:
OK.  Finally got opensim to ask the question: "Would you like to create a new Estate".
 
I uninstalled MySql, deleted the MYSql folder and all db files then reinstalled. Then I realized I was skipping a step - I was never granting permissions to [hidden email]. After doing that, the server loaded. (but soon crashed)
 
Now the new problem:
 
opensim server starts, loads regions and everything looks fine until 5 seconds later when the following appears and opensim crashes:
 
2011-11-19 21:11:56,557 ERROR - OpenSim.Application [APPLICATION]:
APPLICATION EXCEPTION DETECTED: System.UnhandledExceptionEventArgs
Exception: System.UriFormatException: Invalid URI: The hostname could not be parsed.
Server stack trace:
   at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)
   at System.Uri..ctor(String uriString)
   at System.Net.WebRequest.Create(String requestUriString)
   at OpenSim.Services.Connectors.NeighbourServicesConnector.DoHelloNeighbourCall(GridRegion region, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Services\Connectors\Neighbour\NeighbourServiceConnector.cs:line 92
   at OpenSim.Services.Connectors.NeighbourServicesConnector.HelloNeighbour(UInt64 regionHandle, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Services\Connectors\Neighbour\NeighbourServiceConnector.cs:line 78
   at OpenSim.Region.CoreModules.ServiceConnectorsOut.Neighbour.RemoteNeighbourServicesConnector.HelloNeighbour(UInt64 regionHandle, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\CoreModules\ServiceConnectorsOut\Neighbour\RemoteNeighourServiceConnector.cs:line 150
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighboursThatRegionIsUpAsync(INeighbourService neighbourService, RegionInfo region, UInt64 regionhandle) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\Framework\Scenes\SceneCommunicationService.cs:line 161
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
   at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighbourThatRegionUpDelegate.EndInvoke(IAsyncResult result)
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighborsThatRegionisUpCompleted(IAsyncResult iar) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\Framework\Scenes\SceneCommunicationService.cs:line 146
   at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
   at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.DoAsyncCall()
   at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
   at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
Application is terminating: True
 
Any ideas?
 
Thanks,
Wayne
 


 
On Wed, Nov 16, 2011 at 5:50 PM, Justin Clark-Casey <[hidden email]> wrote:
At this stage it starts to sound more like a config issue than anything else.

Are you using an old config or adapting one from the release?  If you are using an old config I recommend you try starting from fresh .example files - reusing old configs is known to cause problems in some situations.


On 16/11/11 19:29, Wayne wrote:
Thank you Fleep and Gwyn for your time in helping me out.
To date, I've tried everything short of reformatting the hard drive - nothing seems to work. When I start the simulator,
it totally skips the message to create an estate. Then, if I try to create a region, it crashes saying that the region
does not belong to an estate. A very frustrating "catch 22" experience.
If I get a solution, I will be sure to post for others who may run into this in the future.
Wayne


On Wed, Nov 16, 2011 at 7:04 AM, Gwyneth Llewelyn <[hidden email]
<mailto:[hidden email]>> wrote:

   Dear Wayne,

   I get this error when launching a home-based region to connect with a server-based grid. The home-based region is
   connecting to an external MySQL database, and I get this error sometimes.

   Why? Apparently what happens is that DynDNS is sometimes slow in updating the IP address for my home connection.
   When that happens, the MySQL database, which is configured to accept connections from a very limited number of
   hosts, will reject the connection. I get this "Region XXX is not part of an estate" when that happens: the
   regions.ini file gets launched, but the first connection call to MySQL is to check if that region is part of an
   Estate, and when that request fails, OpenSim crashes.

   I'm not sure if that's the same problem you have, but it could jusy be related to that: your OpenSim is not being
   able to connect to the database. Check the login, the password, the database name, and if your IP address is allowed
   to connect to MySQL (even if everything is run locally on your machine, it still requires permission to connect to
   "localhost").

   - Gwyn

   On 2011/11/15, at 13:34, Wayne wrote:

   Hello Everyone,
   I recently fired up opensim again after being shutdown for a move to another state. The problem I'm having is that
   each time I try to create a new region or load the regions from my regions.ini file, opensim crashes with the
   message: "Region .... is not part of an estate."
   How can I reset this process or get my set-up back in sync?
   I've tried deleting MySql DB's and recreating but somewhere it is holding on to an existing estate and never gives
   me the option to create a new estate.
   Thanks for the help.
   Wayne
   _______________________________________________
   Opensim-users mailing list
   [hidden email] <mailto:[hidden email]>
   https://lists.berlios.de/mailman/listinfo/opensim-users

   --

   "I'm not building a game. I'm building a new country."

   -- Philip "Linden" Rosedale, interview to Wired, 2004-05-08




   _______________________________________________
   Opensim-users mailing list
   [hidden email] <mailto:[hidden email]>
   https://lists.berlios.de/mailman/listinfo/opensim-users





_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users


--
Justin Clark-Casey (justincc)
http://justincc.org/blog
http://twitter.com/justincc

_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users


_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users



_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users



_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users



_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: Region not part of an estate

Gwyneth Llewelyn
Hi Wayne,

Glad that you've fixed the MySQL access permissions issue; it surely looked that something like that was happening.

As for your new error, it seems quite similar to the one described here: http://opensimulator.org/mantis/view.php?id=3915
 
In that case, it was just a slight spelling mistake on one of the (many) URIs on the .ini files. From your error log, it looks that OpenSim is trying to contact the other regions to tell them that a specific region is up or down. Take a look at Gridcommon.ini to see if all your grid URIs are fine, for starters; if not, you'll simply have to check and double-check that all URIs are correct for your grid configuration (maybe you missed one and it's still the "default" (like, say, http://mygridserver.com:8002 which obviously won't work...).

Good luck in spotting the error!

Cheers,

- Gwyn

On 2011/11/20, at 15:43, Fleep Tuque wrote:

Nod, I thought that was probably the case, but you never know!  :)

In terms of the error you posted, maybe someone with better understanding can reply with more info, but it seems like the relevant part is:  Invalid URI: The hostname could not be parsed.

Maybe double check your configuration files and make sure that you don't have any typos in the URL format anywhere?  What does your region.ini file look like for internal and external hostnames?
 
That's probably where I'd start looking...

Good luck and keep us posted!

- Chris/Fleep



On Sun, Nov 20, 2011 at 10:25 AM, Wayne <[hidden email]> wrote:
Hi Fleep,
 
I typed it backwards in the email.
 
Thanks

On Sun, Nov 20, 2011 at 10:16 AM, Fleep Tuque <[hidden email]> wrote:
Hi Wayne,

Not sure if you typed that backwards in your email but did it correctly when you were creating the database, but assuming your database name and database username are both opensim, then it should be:

grant all on opensim.* to 'opensim'@'localhost';

Not localhost@opensim...

Not sure if that's related to the error you posted but thought I'd mention just in case..

- Chris/Fleep


On Sun, Nov 20, 2011 at 9:42 AM, Wayne <[hidden email]> wrote:
OK.  Finally got opensim to ask the question: "Would you like to create a new Estate".
 
I uninstalled MySql, deleted the MYSql folder and all db files then reinstalled. Then I realized I was skipping a step - I was never granting permissions to [hidden email]. After doing that, the server loaded. (but soon crashed)
 
Now the new problem:
 
opensim server starts, loads regions and everything looks fine until 5 seconds later when the following appears and opensim crashes:
 
2011-11-19 21:11:56,557 ERROR - OpenSim.Application [APPLICATION]:
APPLICATION EXCEPTION DETECTED: System.UnhandledExceptionEventArgs
Exception: System.UriFormatException: Invalid URI: The hostname could not be parsed.
Server stack trace:
   at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)
   at System.Uri..ctor(String uriString)
   at System.Net.WebRequest.Create(String requestUriString)
   at OpenSim.Services.Connectors.NeighbourServicesConnector.DoHelloNeighbourCall(GridRegion region, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Services\Connectors\Neighbour\NeighbourServiceConnector.cs:line 92
   at OpenSim.Services.Connectors.NeighbourServicesConnector.HelloNeighbour(UInt64 regionHandle, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Services\Connectors\Neighbour\NeighbourServiceConnector.cs:line 78
   at OpenSim.Region.CoreModules.ServiceConnectorsOut.Neighbour.RemoteNeighbourServicesConnector.HelloNeighbour(UInt64 regionHandle, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\CoreModules\ServiceConnectorsOut\Neighbour\RemoteNeighourServiceConnector.cs:line 150
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighboursThatRegionIsUpAsync(INeighbourService neighbourService, RegionInfo region, UInt64 regionhandle) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\Framework\Scenes\SceneCommunicationService.cs:line 161
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
   at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighbourThatRegionUpDelegate.EndInvoke(IAsyncResult result)
   at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighborsThatRegionisUpCompleted(IAsyncResult iar) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\Framework\Scenes\SceneCommunicationService.cs:line 146
   at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
   at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.DoAsyncCall()
   at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
   at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
Application is terminating: True
 
Any ideas?
 
Thanks,
Wayne
 


 
On Wed, Nov 16, 2011 at 5:50 PM, Justin Clark-Casey <[hidden email]> wrote:
At this stage it starts to sound more like a config issue than anything else.

Are you using an old config or adapting one from the release?  If you are using an old config I recommend you try starting from fresh .example files - reusing old configs is known to cause problems in some situations.


On 16/11/11 19:29, Wayne wrote:
Thank you Fleep and Gwyn for your time in helping me out.
To date, I've tried everything short of reformatting the hard drive - nothing seems to work. When I start the simulator,
it totally skips the message to create an estate. Then, if I try to create a region, it crashes saying that the region
does not belong to an estate. A very frustrating "catch 22" experience.
If I get a solution, I will be sure to post for others who may run into this in the future.
Wayne


On Wed, Nov 16, 2011 at 7:04 AM, Gwyneth Llewelyn <[hidden email]
<mailto:[hidden email]>> wrote:

   Dear Wayne,

   I get this error when launching a home-based region to connect with a server-based grid. The home-based region is
   connecting to an external MySQL database, and I get this error sometimes.

   Why? Apparently what happens is that DynDNS is sometimes slow in updating the IP address for my home connection.
   When that happens, the MySQL database, which is configured to accept connections from a very limited number of
   hosts, will reject the connection. I get this "Region XXX is not part of an estate" when that happens: the
   regions.ini file gets launched, but the first connection call to MySQL is to check if that region is part of an
   Estate, and when that request fails, OpenSim crashes.

   I'm not sure if that's the same problem you have, but it could jusy be related to that: your OpenSim is not being
   able to connect to the database. Check the login, the password, the database name, and if your IP address is allowed
   to connect to MySQL (even if everything is run locally on your machine, it still requires permission to connect to
   "localhost").

   - Gwyn

   On 2011/11/15, at 13:34, Wayne wrote:

   Hello Everyone,
   I recently fired up opensim again after being shutdown for a move to another state. The problem I'm having is that
   each time I try to create a new region or load the regions from my regions.ini file, opensim crashes with the
   message: "Region .... is not part of an estate."
   How can I reset this process or get my set-up back in sync?
   I've tried deleting MySql DB's and recreating but somewhere it is holding on to an existing estate and never gives
   me the option to create a new estate.
   Thanks for the help.
   Wayne
   _______________________________________________
   Opensim-users mailing list
   [hidden email] <mailto:[hidden email]>
   https://lists.berlios.de/mailman/listinfo/opensim-users

   --

   "I'm not building a game. I'm building a new country."

   -- Philip "Linden" Rosedale, interview to Wired, 2004-05-08




   _______________________________________________
   Opensim-users mailing list
   [hidden email] <mailto:[hidden email]>
   https://lists.berlios.de/mailman/listinfo/opensim-users





_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users


--
Justin Clark-Casey (justincc)
http://justincc.org/blog
http://twitter.com/justincc

_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users


_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users



_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users



_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users


_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users


_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
--
"I'm not building a game. I'm building a new country."
  -- Philip "Linden" Rosedale, interview to Wired, 2004-05-08
Reply | Threaded
Open this post in threaded view
|

Re: Region not part of an estate

justincc
In reply to this post by lppallew
Yes, the problem might be in the addresses in your OpenSim.ini file.  Somehow the URI is malformed.

In commit b89c4ab in git master I improved the errors to give better feedback (i.e. to say exactly what URI is failing).

On 20/11/11 14:42, Wayne wrote:

> OK.  Finally got opensim to ask the question: "Would you like to create a new Estate".
> I uninstalled MySql, deleted the MYSql folder and all db files then reinstalled. Then I realized I was skipping a step -
> I was never granting permissions to localhost@opensim <mailto:localhost@opensim>. After doing that, the server loaded.
> (but soon crashed)
> Now the new problem:
> opensim server starts, loads regions and everything looks fine until 5 seconds later when the following appears and
> opensim crashes:
> 2011-11-19 21:11:56,557 ERROR - OpenSim.Application [APPLICATION]:
> APPLICATION EXCEPTION DETECTED: System.UnhandledExceptionEventArgs
> Exception: System.UriFormatException: Invalid URI: The hostname could not be parsed.
> Server stack trace:
>     at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)
>     at System.Uri..ctor(String uriString)
>     at System.Net.WebRequest.Create(String requestUriString)
>     at OpenSim.Services.Connectors.NeighbourServicesConnector.DoHelloNeighbourCall(GridRegion region, RegionInfo
> thisRegion) in d:\OSGRID\OSGRID 0.7
> RELEASES\opensim-ff36a1b\OpenSim\Services\Connectors\Neighbour\NeighbourServiceConnector.cs:line 92
>     at OpenSim.Services.Connectors.NeighbourServicesConnector.HelloNeighbour(UInt64 regionHandle, RegionInfo thisRegion)
> in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Services\Connectors\Neighbour\NeighbourServiceConnector.cs:line 78
>     at OpenSim.Region.CoreModules.ServiceConnectorsOut.Neighbour.RemoteNeighbourServicesConnector.HelloNeighbour(UInt64
> regionHandle, RegionInfo thisRegion) in d:\OSGRID\OSGRID 0.7
> RELEASES\opensim-ff36a1b\OpenSim\Region\CoreModules\ServiceConnectorsOut\Neighbour\RemoteNeighourServiceConnector.cs:line 150
>     at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighboursThatRegionIsUpAsync(INeighbourService
> neighbourService, RegionInfo region, UInt64 regionhandle) in d:\OSGRID\OSGRID 0.7
> RELEASES\opensim-ff36a1b\OpenSim\Region\Framework\Scenes\SceneCommunicationService.cs:line 161
>     at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object
> server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
>     at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args,
> Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
>     at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
> Exception rethrown at [0]:
>     at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
>     at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
>     at
> OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighbourThatRegionUpDelegate.EndInvoke(IAsyncResult result)
>     at OpenSim.Region.Framework.Scenes.SceneCommunicationService.InformNeighborsThatRegionisUpCompleted(IAsyncResult
> iar) in d:\OSGRID\OSGRID 0.7 RELEASES\opensim-ff36a1b\OpenSim\Region\Framework\Scenes\SceneCommunicationService.cs:line 146
>     at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
>     at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
>     at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.DoAsyncCall()
>     at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
>     at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
>     at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
>     at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
>     at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
> Application is terminating: True
> Any ideas?
> Thanks,
> Wayne
>
>
> On Wed, Nov 16, 2011 at 5:50 PM, Justin Clark-Casey <[hidden email] <mailto:[hidden email]>> wrote:
>
>     At this stage it starts to sound more like a config issue than anything else.
>
>     Are you using an old config or adapting one from the release?  If you are using an old config I recommend you try
>     starting from fresh .example files - reusing old configs is known to cause problems in some situations.
>
>
>     On 16/11/11 19:29, Wayne wrote:
>
>         Thank you Fleep and Gwyn for your time in helping me out.
>         To date, I've tried everything short of reformatting the hard drive - nothing seems to work. When I start the
>         simulator,
>         it totally skips the message to create an estate. Then, if I try to create a region, it crashes saying that the
>         region
>         does not belong to an estate. A very frustrating "catch 22" experience.
>         If I get a solution, I will be sure to post for others who may run into this in the future.
>         Wayne
>
>
>         On Wed, Nov 16, 2011 at 7:04 AM, Gwyneth Llewelyn <[hidden email]
>         <mailto:[hidden email]>
>         <mailto:[hidden email] <mailto:[hidden email]>>> wrote:
>
>             Dear Wayne,
>
>             I get this error when launching a home-based region to connect with a server-based grid. The home-based
>         region is
>             connecting to an external MySQL database, and I get this error sometimes.
>
>             Why? Apparently what happens is that DynDNS is sometimes slow in updating the IP address for my home connection.
>             When that happens, the MySQL database, which is configured to accept connections from a very limited number of
>             hosts, will reject the connection. I get this "Region XXX is not part of an estate" when that happens: the
>             regions.ini file gets launched, but the first connection call to MySQL is to check if that region is part of an
>             Estate, and when that request fails, OpenSim crashes.
>
>             I'm not sure if that's the same problem you have, but it could jusy be related to that: your OpenSim is not
>         being
>             able to connect to the database. Check the login, the password, the database name, and if your IP address is
>         allowed
>             to connect to MySQL (even if everything is run locally on your machine, it still requires permission to
>         connect to
>         "localhost").
>
>             - Gwyn
>
>             On 2011/11/15, at 13:34, Wayne wrote:
>
>                 Hello Everyone,
>                 I recently fired up opensim again after being shutdown for a move to another state. The problem I'm
>             having is that
>                 each time I try to create a new region or load the regions from my regions.ini file, opensim crashes
>             with the
>                 message: "Region .... is not part of an estate."
>                 How can I reset this process or get my set-up back in sync?
>                 I've tried deleting MySql DB's and recreating but somewhere it is holding on to an existing estate and
>             never gives
>                 me the option to create a new estate.
>                 Thanks for the help.
>                 Wayne
>                 _________________________________________________
>                 Opensim-users mailing list
>             [hidden email] <mailto:[hidden email]>
>             <mailto:[hidden email] <mailto:[hidden email]>>
>             https://lists.berlios.de/__mailman/listinfo/opensim-users
>             <https://lists.berlios.de/mailman/listinfo/opensim-users>
>
>
>             --
>
>         "I'm not building a game. I'm building a new country."
>
>             -- Philip "Linden" Rosedale, interview to Wired, 2004-05-08
>
>
>
>
>             _________________________________________________
>             Opensim-users mailing list
>         [hidden email] <mailto:[hidden email]> <mailto:[hidden email]
>         <mailto:[hidden email]>>
>         https://lists.berlios.de/__mailman/listinfo/opensim-users <https://lists.berlios.de/mailman/listinfo/opensim-users>
>
>
>
>
>
>         _________________________________________________
>         Opensim-users mailing list
>         [hidden email] <mailto:[hidden email]>
>         https://lists.berlios.de/__mailman/listinfo/opensim-users <https://lists.berlios.de/mailman/listinfo/opensim-users>
>
>
>
>     --
>     Justin Clark-Casey (justincc)
>     http://justincc.org/blog
>     http://twitter.com/justincc
>
>     _________________________________________________
>     Opensim-users mailing list
>     [hidden email] <mailto:[hidden email]>
>     https://lists.berlios.de/__mailman/listinfo/opensim-users <https://lists.berlios.de/mailman/listinfo/opensim-users>
>
>
>
>
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> https://lists.berlios.de/mailman/listinfo/opensim-users


--
Justin Clark-Casey (justincc)
http://justincc.org/blog
http://twitter.com/justincc
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users