VERY IMPORTANT: runprebuild and a "clean" build are necessary after r9440

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

VERY IMPORTANT: runprebuild and a "clean" build are necessary after r9440

justincc
For those following SVN trunk (which I'll remind you is a dangerous and risky practice), revisions r9438 (for sqlite)
and r9440 (for mysql) migrate the region data to use the dashed uuid format common elsewhere (and already used for some
attributes in the region data).  This is necessary for future work.

THIS MEANS THAT YOU *MUST* RUN prebuild.bat/prebuild.sh *AND* do a clean build ("nant clean build" if you're building on
the command line) IN ORDER TO RUN THE MIGRATION.

If you don't do this, then after updating:

* On SQLite and MySQL you will see the completely blank startup islands instead of your usual regions.   DO NOT PANIC
ALL YOUR DATA IS STILL THERE!  Simply do a runprebuild and a clean build as above.  This will allow the data migration
to run and make your region accessible again.

* MSSQL is unaffected.

Please spread the word about this as necessary.

Regards,

--
justincc
Justin Clark-Casey
http://justincc.wordpress.com
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: [Opensim-dev] VERY IMPORTANT: runprebuild and a "clean" build are necessary after r9440

Kyle Hamilton
It's about time. :)

-Kyle H

On Thu, May 7, 2009 at 8:58 AM, Justin Clark-Casey
<[hidden email]> wrote:

> For those following SVN trunk (which I'll remind you is a dangerous and risky practice), revisions r9438 (for sqlite)
> and r9440 (for mysql) migrate the region data to use the dashed uuid format common elsewhere (and already used for some
> attributes in the region data).  This is necessary for future work.
>
> THIS MEANS THAT YOU *MUST* RUN prebuild.bat/prebuild.sh *AND* do a clean build ("nant clean build" if you're building on
> the command line) IN ORDER TO RUN THE MIGRATION.
>
> If you don't do this, then after updating:
>
> * On SQLite and MySQL you will see the completely blank startup islands instead of your usual regions.   DO NOT PANIC
> ALL YOUR DATA IS STILL THERE!  Simply do a runprebuild and a clean build as above.  This will allow the data migration
> to run and make your region accessible again.
>
> * MSSQL is unaffected.
>
> Please spread the word about this as necessary.
>
> Regards,
>
> --
> justincc
> Justin Clark-Casey
> http://justincc.wordpress.com
> _______________________________________________
> Opensim-dev mailing list
> [hidden email]
> https://lists.berlios.de/mailman/listinfo/opensim-dev
>
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: [Opensim-dev] VERY IMPORTANT: runprebuild and a"clean" build are necessary after r9440

drwhiet@spacefriends.de

did i missed something ? is this relevant to my interests ?
is that something in the aftermath of the transition yesterday ?

best regards
Wordfromthe Wise

-----Ursprüngliche Nachricht-----
Von: [hidden email]
[mailto:[hidden email]] Im Auftrag von Kyle Hamilton
Gesendet: Donnerstag, 7. Mai 2009 21:57
An: [hidden email]
Cc: OpenSim Users Mailing List
Betreff: Re: [Opensim-users] [Opensim-dev] VERY IMPORTANT: runprebuild and
a"clean" build are necessary after r9440

It's about time. :)

-Kyle H

On Thu, May 7, 2009 at 8:58 AM, Justin Clark-Casey
<[hidden email]> wrote:
> For those following SVN trunk (which I'll remind you is a dangerous
> and risky practice), revisions r9438 (for sqlite) and r9440 (for
> mysql) migrate the region data to use the dashed uuid format common
elsewhere (and already used for some attributes in the region data).  This
is necessary for future work.
>
> THIS MEANS THAT YOU *MUST* RUN prebuild.bat/prebuild.sh *AND* do a
> clean build ("nant clean build" if you're building on the command line) IN
ORDER TO RUN THE MIGRATION.
>
> If you don't do this, then after updating:
>
> * On SQLite and MySQL you will see the completely blank startup
> islands instead of your usual regions.   DO NOT PANIC ALL YOUR DATA IS
> STILL THERE!  Simply do a runprebuild and a clean build as above.  This
will allow the data migration to run and make your region accessible again.

>
> * MSSQL is unaffected.
>
> Please spread the word about this as necessary.
>
> Regards,
>
> --
> justincc
> Justin Clark-Casey
> http://justincc.wordpress.com
> _______________________________________________
> Opensim-dev mailing list
> [hidden email]
> https://lists.berlios.de/mailman/listinfo/opensim-dev
>
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users

_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users