physics issue

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

physics issue

andrew johnson-3

i just noticed the physics don't work anymore on opensim 0.6.7 because i changed physics to basic physics or POS or Modified_bulletXL and resulted the cube don't move - its was possible before in older version
anyone has noticed that?
     
_________________________________________________________________
View your other email accounts from your Hotmail inbox. Add them now.
http://clk.atdmt.com/UKM/go/186394592/direct/01/
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: physics issue

Teravus Ovares
Currently, the only full featured physics engine that OpenSimulator
supports is the OpenDynamicsEngine .       The rest are currently
either highly experimental or limited in features.

Regards

Teravus

On Sun, Dec 13, 2009 at 4:01 PM, andrew johnson
<[hidden email]> wrote:

>
> i just noticed the physics don't work anymore on opensim 0.6.7 because i changed physics to basic physics or POS or Modified_bulletXL and resulted the cube don't move - its was possible before in older version
> anyone has noticed that?
>
> _________________________________________________________________
> View your other email accounts from your Hotmail inbox. Add them now.
> http://clk.atdmt.com/UKM/go/186394592/direct/01/
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> https://lists.berlios.de/mailman/listinfo/opensim-users
>
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: physics issue

andrew johnson-3

yes but opendynmaics engine is not working because i tested it

----------------------------------------

> Date: Sun, 13 Dec 2009 16:22:40 -0500
> From: [hidden email]
> To: [hidden email]
> Subject: Re: [Opensim-users] physics issue
>
> Currently, the only full featured physics engine that OpenSimulator
> supports is the OpenDynamicsEngine . The rest are currently
> either highly experimental or limited in features.
>
> Regards
>
> Teravus
>
> On Sun, Dec 13, 2009 at 4:01 PM, andrew johnson
>  wrote:
>>
>> i just noticed the physics don't work anymore on opensim 0.6.7 because i changed physics to basic physics or POS or Modified_bulletXL and resulted the cube don't move - its was possible before in older version
>> anyone has noticed that?
>>
>> _________________________________________________________________
>> View your other email accounts from your Hotmail inbox. Add them now.
>> http://clk.atdmt.com/UKM/go/186394592/direct/01/
>> _______________________________________________
>> Opensim-users mailing list
>> [hidden email]
>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> https://lists.berlios.de/mailman/listinfo/opensim-users
     
_________________________________________________________________
Use Hotmail to send and receive mail from your different email accounts
http://clk.atdmt.com/UKM/go/186394592/direct/01/
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: physics issue

Teravus Ovares
If you want a complete and detailed answer, then please provide a
complete and detailed description of what's happening.     It sounds
to me like you're having some kind of error with OpenDynamicsEngine
and so you're trying other options.

Regards
Teravus

On Sun, Dec 13, 2009 at 8:15 PM, andrew johnson
<[hidden email]> wrote:

>
> yes but opendynmaics engine is not working because i tested it
>
> ----------------------------------------
>> Date: Sun, 13 Dec 2009 16:22:40 -0500
>> From: [hidden email]
>> To: [hidden email]
>> Subject: Re: [Opensim-users] physics issue
>>
>> Currently, the only full featured physics engine that OpenSimulator
>> supports is the OpenDynamicsEngine . The rest are currently
>> either highly experimental or limited in features.
>>
>> Regards
>>
>> Teravus
>>
>> On Sun, Dec 13, 2009 at 4:01 PM, andrew johnson
>>  wrote:
>>>
>>> i just noticed the physics don't work anymore on opensim 0.6.7 because i changed physics to basic physics or POS or Modified_bulletXL and resulted the cube don't move - its was possible before in older version
>>> anyone has noticed that?
>>>
>>> _________________________________________________________________
>>> View your other email accounts from your Hotmail inbox. Add them now.
>>> http://clk.atdmt.com/UKM/go/186394592/direct/01/
>>> _______________________________________________
>>> Opensim-users mailing list
>>> [hidden email]
>>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>>
>> _______________________________________________
>> Opensim-users mailing list
>> [hidden email]
>> https://lists.berlios.de/mailman/listinfo/opensim-users
>
> _________________________________________________________________
> Use Hotmail to send and receive mail from your different email accounts
> http://clk.atdmt.com/UKM/go/186394592/direct/01/
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> https://lists.berlios.de/mailman/listinfo/opensim-users
>
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: physics issue

andrew johnson-3

yes i will try explain bit more

we rezzed few cubes and enabled them and they didn't fall to ground as should be and we walked through prims its should be solid for us - we tried the 4 options but none of them working - OpenDynamicsEngine and POS and Basic and Modifed_bullet

----------------------------------------

> Date: Sun, 13 Dec 2009 22:07:12 -0500
> From: [hidden email]
> To: [hidden email]
> Subject: Re: [Opensim-users] physics issue
>
> If you want a complete and detailed answer, then please provide a
> complete and detailed description of what's happening. It sounds
> to me like you're having some kind of error with OpenDynamicsEngine
> and so you're trying other options.
>
> Regards
> Teravus
>
> On Sun, Dec 13, 2009 at 8:15 PM, andrew johnson
>  wrote:
>>
>> yes but opendynmaics engine is not working because i tested it
>>
>> ----------------------------------------
>>> Date: Sun, 13 Dec 2009 16:22:40 -0500
>>> From: [hidden email]
>>> To: [hidden email]
>>> Subject: Re: [Opensim-users] physics issue
>>>
>>> Currently, the only full featured physics engine that OpenSimulator
>>> supports is the OpenDynamicsEngine . The rest are currently
>>> either highly experimental or limited in features.
>>>
>>> Regards
>>>
>>> Teravus
>>>
>>> On Sun, Dec 13, 2009 at 4:01 PM, andrew johnson
>>>  wrote:
>>>>
>>>> i just noticed the physics don't work anymore on opensim 0.6.7 because i changed physics to basic physics or POS or Modified_bulletXL and resulted the cube don't move - its was possible before in older version
>>>> anyone has noticed that?
>>>>
>>>> _________________________________________________________________
>>>> View your other email accounts from your Hotmail inbox. Add them now.
>>>> http://clk.atdmt.com/UKM/go/186394592/direct/01/
>>>> _______________________________________________
>>>> Opensim-users mailing list
>>>> [hidden email]
>>>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>>>
>>> _______________________________________________
>>> Opensim-users mailing list
>>> [hidden email]
>>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>
>> _________________________________________________________________
>> Use Hotmail to send and receive mail from your different email accounts
>> http://clk.atdmt.com/UKM/go/186394592/direct/01/
>> _______________________________________________
>> Opensim-users mailing list
>> [hidden email]
>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> https://lists.berlios.de/mailman/listinfo/opensim-users
     
_________________________________________________________________
Add your Gmail and Yahoo! Mail email accounts into Hotmail - it's easy
http://clk.atdmt.com/UKM/go/186394592/direct/01/
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: physics issue

Teravus Ovares
If you enabled OpenDynamicsEngine, then it will either block you from
walking or give you errors.    Please try again.   physics =
OpenDynamicsEngine in OpenSim.ini

Best Regards

Teravus

On Sun, Dec 13, 2009 at 10:42 PM, andrew johnson
<[hidden email]> wrote:

>
> yes i will try explain bit more
>
> we rezzed few cubes and enabled them and they didn't fall to ground as should be and we walked through prims its should be solid for us - we tried the 4 options but none of them working - OpenDynamicsEngine and POS and Basic and Modifed_bullet
>
> ----------------------------------------
>> Date: Sun, 13 Dec 2009 22:07:12 -0500
>> From: [hidden email]
>> To: [hidden email]
>> Subject: Re: [Opensim-users] physics issue
>>
>> If you want a complete and detailed answer, then please provide a
>> complete and detailed description of what's happening. It sounds
>> to me like you're having some kind of error with OpenDynamicsEngine
>> and so you're trying other options.
>>
>> Regards
>> Teravus
>>
>> On Sun, Dec 13, 2009 at 8:15 PM, andrew johnson
>>  wrote:
>>>
>>> yes but opendynmaics engine is not working because i tested it
>>>
>>> ----------------------------------------
>>>> Date: Sun, 13 Dec 2009 16:22:40 -0500
>>>> From: [hidden email]
>>>> To: [hidden email]
>>>> Subject: Re: [Opensim-users] physics issue
>>>>
>>>> Currently, the only full featured physics engine that OpenSimulator
>>>> supports is the OpenDynamicsEngine . The rest are currently
>>>> either highly experimental or limited in features.
>>>>
>>>> Regards
>>>>
>>>> Teravus
>>>>
>>>> On Sun, Dec 13, 2009 at 4:01 PM, andrew johnson
>>>>  wrote:
>>>>>
>>>>> i just noticed the physics don't work anymore on opensim 0.6.7 because i changed physics to basic physics or POS or Modified_bulletXL and resulted the cube don't move - its was possible before in older version
>>>>> anyone has noticed that?
>>>>>
>>>>> _________________________________________________________________
>>>>> View your other email accounts from your Hotmail inbox. Add them now.
>>>>> http://clk.atdmt.com/UKM/go/186394592/direct/01/
>>>>> _______________________________________________
>>>>> Opensim-users mailing list
>>>>> [hidden email]
>>>>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>>>>
>>>> _______________________________________________
>>>> Opensim-users mailing list
>>>> [hidden email]
>>>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>>
>>> _________________________________________________________________
>>> Use Hotmail to send and receive mail from your different email accounts
>>> http://clk.atdmt.com/UKM/go/186394592/direct/01/
>>> _______________________________________________
>>> Opensim-users mailing list
>>> [hidden email]
>>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>>
>> _______________________________________________
>> Opensim-users mailing list
>> [hidden email]
>> https://lists.berlios.de/mailman/listinfo/opensim-users
>
> _________________________________________________________________
> Add your Gmail and Yahoo! Mail email accounts into Hotmail - it's easy
> http://clk.atdmt.com/UKM/go/186394592/direct/01/
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> https://lists.berlios.de/mailman/listinfo/opensim-users
>
_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users
Reply | Threaded
Open this post in threaded view
|

Re: physics issue

LaeMing
I have been seeing this error in new builds off SVN mirror of GIT the past
week:

ERROR - OpenSim.Region.Physics.OdePlugin.OdeScene.06-06 [PHYSICS]: Method not
found: 'OpenSim.Region.Physics.Manager.RaycastCallback.Invoke'., Int32
ProcessQueuedRequests(), System.MissingMethodException: Method not found:
'OpenSim.Region.Physics.Manager.RaycastCallback.Invoke'.
  at
OpenSim.Region.Physics.OdePlugin.ODERayCastRequestManager.ProcessQueuedRequests
() [0x00000]

line after line of them!!!! ;-)

haven't reported it yet as I haven't had time to check if it is a dangling old
dll left from an old build, which is often the cause of these things in my
experience (I copy the new bin onto the old when I recompile which is easiest
when it works but generates issues for me if dlls change names or get
eliminated from new builds). Need to get time to do a side-by-side comparison
of all the dlls in a virgin build vs my working directory.

Reverted to my last working build as soon as I saw the console output so can't
comment on in-world physics behaviour at this point.

Lae

On Monday December 14 2009 15:36:09 Teravus Ovares wrote:

> If you enabled OpenDynamicsEngine, then it will either block you from
> walking or give you errors.    Please try again.   physics =
> OpenDynamicsEngine in OpenSim.ini
>
> Best Regards
>
> Teravus
>
> On Sun, Dec 13, 2009 at 10:42 PM, andrew johnson
>
> <[hidden email]> wrote:
> > yes i will try explain bit more
> >
> > we rezzed few cubes and enabled them and they didn't fall to ground as
> > should be and we walked through prims its should be solid for us - we
> > tried the 4 options but none of them working - OpenDynamicsEngine and POS
> > and Basic and Modifed_bullet
> >
> > ----------------------------------------
> >
> >> Date: Sun, 13 Dec 2009 22:07:12 -0500
> >> From: [hidden email]
> >> To: [hidden email]
> >> Subject: Re: [Opensim-users] physics issue
> >>
> >> If you want a complete and detailed answer, then please provide a
> >> complete and detailed description of what's happening. It sounds
> >> to me like you're having some kind of error with OpenDynamicsEngine
> >> and so you're trying other options.
> >>
> >> Regards
> >> Teravus
> >>
> >> On Sun, Dec 13, 2009 at 8:15 PM, andrew johnson
> >>
> >>  wrote:
> >>> yes but opendynmaics engine is not working because i tested it
> >>>
> >>> ----------------------------------------
> >>>
> >>>> Date: Sun, 13 Dec 2009 16:22:40 -0500
> >>>> From: [hidden email]
> >>>> To: [hidden email]
> >>>> Subject: Re: [Opensim-users] physics issue
> >>>>
> >>>> Currently, the only full featured physics engine that OpenSimulator
> >>>> supports is the OpenDynamicsEngine . The rest are currently
> >>>> either highly experimental or limited in features.
> >>>>
> >>>> Regards
> >>>>
> >>>> Teravus
> >>>>
> >>>> On Sun, Dec 13, 2009 at 4:01 PM, andrew johnson
> >>>>
> >>>>  wrote:
> >>>>> i just noticed the physics don't work anymore on opensim 0.6.7
> >>>>> because i changed physics to basic physics or POS or
> >>>>> Modified_bulletXL and resulted the cube don't move - its was possible
> >>>>> before in older version anyone has noticed that?
> >>>>>
> >>>>> _________________________________________________________________
> >>>>> View your other email accounts from your Hotmail inbox. Add them now.
> >>>>> http://clk.atdmt.com/UKM/go/186394592/direct/01/
> >>>>> _______________________________________________
> >>>>> Opensim-users mailing list
> >>>>> [hidden email]
> >>>>> https://lists.berlios.de/mailman/listinfo/opensim-users
> >>>>
> >>>> _______________________________________________
> >>>> Opensim-users mailing list
> >>>> [hidden email]
> >>>> https://lists.berlios.de/mailman/listinfo/opensim-users
> >>>
> >>> _________________________________________________________________
> >>> Use Hotmail to send and receive mail from your different email accounts
> >>> http://clk.atdmt.com/UKM/go/186394592/direct/01/
> >>> _______________________________________________
> >>> Opensim-users mailing list
> >>> [hidden email]
> >>> https://lists.berlios.de/mailman/listinfo/opensim-users
> >>
> >> _______________________________________________
> >> Opensim-users mailing list
> >> [hidden email]
> >> https://lists.berlios.de/mailman/listinfo/opensim-users
> >
> > _________________________________________________________________
> > Add your Gmail and Yahoo! Mail email accounts into Hotmail - it's easy
> > http://clk.atdmt.com/UKM/go/186394592/direct/01/
> > _______________________________________________
> > Opensim-users mailing list
> > [hidden email]
> > https://lists.berlios.de/mailman/listinfo/opensim-users
>
> _______________________________________________
> Opensim-users mailing list
> [hidden email]
> https://lists.berlios.de/mailman/listinfo/opensim-users
>

_______________________________________________
Opensim-users mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/opensim-users